Fredericksburg Silicosis Cancer

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Fredericksburg 

Household Mold

– Entrust is to an Expert

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration

Mold Inspections - Make the Best Choice

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration


For More Information on Dustless Tile Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Fischer Chronic Silicosis

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Fischer 

Remove Black Mold From Your Bathroom Walls

– Entrust is to an Expert

How To Get Rid Of Black Mold

Black mold is a nasty form of mold that can cause serious health problems. It can cause you to experience symptoms related to upper respiratory tract issues such as coughing and wheezing. It can even cause you to develop a condition called hypersensitivity pneumonitis if you are susceptible to this condition. In fact, there is evidence that links indoor mold exposure to respiratory illness in children that are otherwise healthy. Also, people with Chronic Obstructive Pulmonary Disease (COPD) are at risk for developing fungal infections in their lungs.

Getting Rid Of A Nuisance Problem

If you catch the black mold early and before it becomes widespread, it's relatively easy to eliminate. If the mold is on a hard surface you can get rid of it with a thorough cleaning using a commercial product or by using a solution made with a cup of bleach to 1 gallon of water.

Unfortunately, if the black mold is on some porous material such as ceiling tiles, drywall or carpet you should actually throw the material away. Since you can actually have an allergic reaction to even dead mold, you need to make sure you properly clean and dry the area. If you don't clean and dry it completely and there is still moisture present, the black mold could come back.

Cleaning The Black Mold Yourself

If you choose to clean up the black mold yourself using bleach, here are some things you need to know.

1. Never mix the bleach with other household cleaners or ammonia. This can produce dangerous, toxic fumes.

2. Be sure to open doors and windows so that you have a good supply of fresh air.

3. Wear protective eyewear and non-porous gloves.

4. If the area you need to clean is more than 10 square feet, you should consult the Environmental Protection Agency's Guide to Mold Remediation in Schools and Commercial Buildings. This guide may be focused on commercial buildings and schools but applies to other building types as well, including your home.

If you are using bleach or some other commercial cleaning product, be sure to follow all the manufacturer's instructions for its use.

How To Do The Cleanup

Begin by lightly misting the area to be cleaned with water. Next, scrub the mold with warm soapy water or the bleach mixture described above. When you have cleaned off all the black mold, you will need to spray the area with a disinfectant in order to kill any remaining spores that may not be visible.

Here are some of the best disinfectants you can use.

· Alcohols

· Quaternary Ammonium Compounds

· Phenolics

· Iodophors

· Hypochlorites (such as Clorox Bleach)

· Hydrogen Peroxide

When you have finished the cleaning and disinfecting, seal the room and allow it to dry completely.

Wear Protective Gear

Since black mold can be hazardous to your health, you should wear protective gear while doing that cleanup. For openers, wear a respirator. Second, wear goggles. This will prevent black mold spores from getting into and infecting the delicate structure of your eyes. Third, wear rubber gloves. Finally, be sure to wear clothing that covers your entire body and that can be easily cleaned after you finish removing the mold.

If The Mold Is Extensive

If you have an extensive amount of black mold in your house or basement, it would be best to call a professional mold removal company. However, if you only have small patchy areas, you can remove it as described above and be rid of this nasty stuff!

Mold Inspections - Make the Best Choice

Before a person ever decides to search for the best mold inspection company in their area, they should first know a few facts:

1. In the author's opinion, every house on the planet has mold in it. Mold is a member of the Fungi family and exists naturally in our environment. It is airborne and enters our houses whenever a door or window is open and in numerous other ways.
2. Inside of a house, mold will not be a problem unless it has been exposed to water for more than 48-72 hours. So, if you have seen, or know of evidence of water inside your house and you suspect that it has been there for at least 48 hours, you are most certain to have harmful (toxic) mold.
3. Even if you can't see any water, it still may be lurking behind your walls, sinks, or tubs; perhaps under windows or other locations. If you can smell a musty or unpleasant odor (some in the family may detect it while others can't), you have a harmful mold problem.
4. If you or other members of your house have asthma, other respiratory problems, coughing, runny nose or eyes, headaches, or tend to feel much better when you are away from the house and worse when you are in it, you almost certainly have a mold problem.

Knowing that you likely have a mold problem but not knowing what to do next, speaks volumes in favor of hiring a professional. But which one? You could likely have several mold inspection companies to chose from on sites like Yahoo or Google; but how does a homeowner find the best one for their needs?

My advice is: First I recommend that the company specializes in mold. Not mold and/or radon, lead, air ducts, etc. Next, I recommend that they have both education and experience at least equal to or better than their competitors. While most every state requires that home inspectors be licensed, only two states require so of mold inspectors.Are they certified? This would tell you that they cared enough about their profession to acquire knowledge and training to meet standards. Experience counts. How long has the inspector been certified? How many jobs have they performed? Not just the company, but the individual inspector? Can they get references? Have they been cited by the Better Business Bureau for any deceptive, misleading, or dishonest practices?

The next criteria is critical: Are they also in the business of mold remediation or removal? If they are it could be a blatant conflict of interest. Wouldn't it be to there interest to overstate the level of mold problems and/or the amount of remediation needed if they were in line to pick up a job worth several thousands of dollars? Therefore, I recommend that you find a professional who only inspects for mold.

OK, so now how should your inspector look for and find your problem? When they are finished will they be able to tell you for certain where your mold is and why you have the problem? Isn't that how you would like to spend your money?

Testing for mold is most often done by the old fashioned method called air testing. This procedure sucks air into a machine that then traps it into a laboratory testing dish, which in turn gets sent to a laboratory for culturing. This process can take a week or more for the results. When air testing is performed, the inspector should always take one test outside of the house in order to determine a benchmark as to what mold(s) are prevalent in your area. They then will try to take as many tests inside of the house as the customer can afford. In most areas of the country, these tests cost about $100 each. Some of the problems with air testing are:
1. The more tests that are performed, the more costly the job.
2. Air testing is highly inaccurate. All it can do is to tell you what was in the air at that location at that moment in time. Results can vary widely over time and method used. Airborne fungal spore concentrations vary greatly over the course of hours, days, weeks, and seasons.
3. In colder climates when there is snow on the ground, the results of the outside test will be useless in that spore count is greatly or totally reduced. I have yet to hear that a customer was told this fact.
4. There are no numerical standards to which tests can be prepared, making interpretation difficult.
5. Even the best tests can not determine how much exposure people in the house have had in the past.
6. Fungal air tests are expensive.
7. Results are slow to receive.
8. Knowing the type of mold does not change the way that you would respond. All mold that is active, or was active, is bad mold.

Then what does represent a professional, accurate, and helpful mold inspection? The most intelligent inspections should: Find all mold. Determine the cause; i.e. Where is the water problem(s). Explain how to fix the problem(s).

This inspection requires work, experience, and knowledge. It is also labor intensive; lasting about 2 hours or more on average. It begins with an intensive investigation of the property outside of the house. It finds flaws in roofs, chimneys, gutters, downspouts, foundations, and/or landscaping. In short, anywhere and any way that water could get into the house and cause a problem. Then, moving inside the inspection closely is conducted looking throughout the house, basement, and attic for issues under windows, sinks, tubs, showers, washer and dryers. Tools such as moisture meters, hygrometers, and boroscopes should be utilized as appropriate.

Following that, in my inspections, I work with a Certified Mold Dog. Together we systematically cover every inch of the house. Dogs such as mine have the ability to detect the scent of mold in one part per trillion. Humans are limited to one part per hundred. Two university studies are known that matched dogs scenting ability versus that of machines. Dogs won easily both times. Dogs have the ability to detect the scent of mold from behind walls, floors, or ceilings where it often is found. No machine can do that. With their ability to pinpoint the location of the mold, remediation costs are reduced to a fraction of what they may have been, or eliminated entirely.

Lastly, the customer should ask for, and receive a professionally written report that captures all that was seen, found, and measured during the inspection and remediation recommendations. This is how my company, Mold Rover, Inc. operates. It is what I think the customer needs and deserves for their money.


For More Information on Asthma

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Doss Dust Free Concrete Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Doss 

Prevent Mold and Mildew

– Entrust is to an Expert

There is now a lot of evidence to connect black mold with Sudden Infant Death Syndrome (SIDS) and miscarriage. The death of an infant can be devastating for a family so can losing a baby due to miscarriage. It is vital that any steps needed to prevent these awful events should be taken.

It is not just the fact that black mold is toxic that means that it is dangerous to infants. One way that it is believed to work is that black mold spores end up in baby's mattress and they releases harmful chemicals from the mattress into the air and the baby breathes this lethal gas. This process is believed to be responsible for many cases of SIDS.

Black mold has also been associated with miscarriage. It seems that exposure to mold toxin could be the cause of many women losing their baby during pregnancy. Not all mold is toxic, but it is almost impossible to tell this by just looking. The usual way to determine toxicity is by sending the mold to be tested in a laboratory. This is why it is probably a good idea that pregnant women treat all mold as if it were toxic and keeping well away from it.

The best way to stop black mold from becoming an issue for infants and those who are pregnant is to prevent it occurring in your home, and if you do have it to quickly eliminate the problem. This can be a difficult issue for those who are living in rented accommodation and have a landlord who just won't do anything about your mold problem. The advice here is to find somewhere else to stay either permanently or until the problem is fixed.

The real danger comes when black mold is growing and you are not even aware of it. Mold likes damp places that are poorly ventilated so make sure you check your attic and basement and any other cubby holes. Of course, if you are pregnant you will want someone else to conduct this search for you. In most instances eradicating the mold will be fairly straight forward so long as you discover it all. Pregnant women should not be involved in any part of the cleaning up process, but be kept well away from the area in case toxic spores are released into the air. When the mold is completely removed you will then need to take measures to make sure it doesn't back again.

Black Mold May Cause Sudden Infant Death Syndrome and Miscarriage

Mold & Moisture

The crawl space is the number one source for potential moisture entering your home. The moisture may be equal to gallons of water but in vapor form and not even visible. A seal tight liner kit will instantly stop the moisture in the crawl space from entering home as well as eliminating radon gas, musty odors, mildew and mold.

"The U.S. EPA states: "Molds are usually not a problem unless mold spores land on a wet or damp spot and begin growing. Molds produce allergens, irritants and potentially toxic substances. The key to mold control is moisture control. The mold will not grow if moisture is not present (source: EPA " A Brief Guide to Mold, Mildew and Your Home," publication #402-K-02-003)."

Eliminate the Existing Mold

To eliminate and prevent future mold growth, spray the affected areas with a mold killing and growth preventing spray, there are good products for purchase at your local building supply house.

My Take on the Problems with Bleach

The Myth Of Using Bleach To Kill Mold! Mold has a root system that actually grows into the surfaces of wood, drywall, concrete, etc..., like tree roots grow into the soil. The roots are not killed by bleach alone because the bleach does not penetrate the surface of porous materials. The bleach chemical portion sits on the surface until gassing off, killing only the mold on the surface leaving the roots intact, while the water portion of the bleach soaks into the material giving the mold roots a food source to start growing again. Think of it this way, if you were to cut a tree, plant, grass, or anything that has roots down and you water the area, you will see what you cut start to grow again. This is because the roots were not killed. The other problem with using bleach for an extended period is that if sprayed on wood and other building materials it actually starts to break down the products.

STOPPING MOLD AT THE ROOTS IS THE ONLY WAY!!!

Chlorine Bleach is NOT a registered EPA Mold Killing product!

If you think that we're just knocking bleach. Don't take our word for it! Go to http://epa.gov/mold/moldcourse/index.html and read what the EPA has to say about using bleach to kill mold. The EPA says that "The use of bleach is not recommended as a routine practice during mold clean-up" http://iaq.custhelp.com question #7.

Now you might ask: How do I kill mold if not with bleach?

Answer: Use an EPA approved and registered fungicide to kill the mold at its roots.


For More Information on Concrete Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Bluffton Clean Air Floor Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Bluffton 

Black Mold May Cause Sudden Infant Death Syndrome and Miscarriage

– Entrust is to an Expert

There is a a lot of information that can be gathered about mold cleaning. Some of them are true and some are nothing but purely air-popped claims. The use of bleach for an effective mold remediation is one of those that causes confusion in today's quest for a mold-free indoor environment.

The dizziness that bleach creates resides on the argument whether the use of it can indeed kill molds or not. Because bleach had been around for like many many years now, a lot believes that yes, the use of it can make a mold removal process effective. But as been said, not everything should be always believed.

Basically, the most appropriate point that can be presented with regards to the use of bleach in mold cleaning is this: bleach can kill molds but not always. There are some mold infestation cases in which any cleaning move is nothing but a futile attempt. It can sometimes produce no result and even in cases that it does, it sure wouldn't be as good as what have been expected.

Instances to which bleach can sure serve well and effective are often on mold infestation on hard and non-porous surfaces such as tiles and concrete. To porous materials on the other hand, purchasing and applying of bleach can cause waste instead of being a help.

So why is it that bleach is not always as effective in mold cleaning as many claim it to be? The following can be of help for better understanding.

  • Bleach is not specifically formulated for a complete mold removal. It is regarded as an all-around cleaner which conjures the idea that it always effectively kill molds. However, this is not entirely true as bleach is largely made up of water that encourages molds to grow. Therefore, bleach can sometimes kill molds but it can not prevent their regrowth.
  • To entirely get rid of molds, their roots must be cut off. Unfortunately, bleach can only reach the external surface and does not go deeper on the root level. This makes it unable to cut the roots which make molds capable of regrowing.
  • Bleach is made of chlorine which is a chemical element. Though it can be useful as a disinfectant, it can also be destructive to human health and the environment. Inhaling chlorine can cause damage to the respiratory system, can lead to coughing and vomiting and can also irritate the eyes. Its major negative contribution to the environment lies on the destruction of the ozone layer.
  • The rather small potential bleach has in removing molds deteriorates fast. Its power can reduce to half when stored or unused within 90 days.
  • When the mold removal process is to be implanted on fabrics, wood or paper, the use of bleach can speed up the deterioration of the item.

In conclusion, bleach can actually work in removing molds. But it then it has some considerable limitations. Those limitations make bleach a not-so-ideal product to for a truly effective mold cleaning process.

Bleach For Mold Remediation - Good Or Bad Decision?

Household mold is considered an environmental annoyance that can cause irritation while breathing. It can make the health of asthma patients worse and can cause allergic problems to sensitive persons. The mold may affect children with several problems such as irritation, allergies, and infections.

Household mold comes in a wide variety of species and forms. It differs in colors, including charcoal, grey, and black. There is variation in toxicity for different species. Among the species, six are common in which three can produce toxins. These six common molds are Stachybotris, Aspergillus, Penicillium, Alternaria, Mucor, and Cladosporium. Stachybotris is a toxic mold that can produce more than 200 poisonous substances. These toxins are autoimmune and can affect the nervous system. Aspergillus is an opportunistic fungus that can cause pathological problems to human beings.

Household mold is found everywhere in day to day households. It can grow anywhere, on tiles, grout, food, fabric, plaster, and wood. The mold grows well at room temperature with humidity. Other necessary items for mold growth are adequate moisture and nutrients. These items are obtained from the surface where the mold grows. The mold can destroy the material on which it grows.

There are certain ways to identify and control the presence of household mold. First, check whether there is any sign of moisture or mold at home. A musty smell in a room is an indication of mold growth. If there is any sign of mold, then find the particular surface of the mold growth and clean the surface. Additionally, remove the sources of moisture and keep the moisture content in the rooms at a desired level. Water should not be allowed to stand in drip pans of refrigerators and air conditioners.

Secondly, check whether there is any leakage problem, water stains or water discoloration from taps, especially in the bathrooms and kitchens. If these problems are found, rectify them immediately to prevent the mold growth. Even if the mold is removed, but the water problem is not solved, then the mold will appear again on the same surface.


For More Information on Ceramic Tile Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Blanco Granite Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Blanco 

How to Get Rid of Mold - Common Causes and Cleaning Techniques

– Entrust is to an Expert

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration

Household Mold

How To Get Rid Of Black Mold

Black mold is a nasty form of mold that can cause serious health problems. It can cause you to experience symptoms related to upper respiratory tract issues such as coughing and wheezing. It can even cause you to develop a condition called hypersensitivity pneumonitis if you are susceptible to this condition. In fact, there is evidence that links indoor mold exposure to respiratory illness in children that are otherwise healthy. Also, people with Chronic Obstructive Pulmonary Disease (COPD) are at risk for developing fungal infections in their lungs.

Getting Rid Of A Nuisance Problem

If you catch the black mold early and before it becomes widespread, it's relatively easy to eliminate. If the mold is on a hard surface you can get rid of it with a thorough cleaning using a commercial product or by using a solution made with a cup of bleach to 1 gallon of water.

Unfortunately, if the black mold is on some porous material such as ceiling tiles, drywall or carpet you should actually throw the material away. Since you can actually have an allergic reaction to even dead mold, you need to make sure you properly clean and dry the area. If you don't clean and dry it completely and there is still moisture present, the black mold could come back.

Cleaning The Black Mold Yourself

If you choose to clean up the black mold yourself using bleach, here are some things you need to know.

1. Never mix the bleach with other household cleaners or ammonia. This can produce dangerous, toxic fumes.

2. Be sure to open doors and windows so that you have a good supply of fresh air.

3. Wear protective eyewear and non-porous gloves.

4. If the area you need to clean is more than 10 square feet, you should consult the Environmental Protection Agency's Guide to Mold Remediation in Schools and Commercial Buildings. This guide may be focused on commercial buildings and schools but applies to other building types as well, including your home.

If you are using bleach or some other commercial cleaning product, be sure to follow all the manufacturer's instructions for its use.

How To Do The Cleanup

Begin by lightly misting the area to be cleaned with water. Next, scrub the mold with warm soapy water or the bleach mixture described above. When you have cleaned off all the black mold, you will need to spray the area with a disinfectant in order to kill any remaining spores that may not be visible.

Here are some of the best disinfectants you can use.

· Alcohols

· Quaternary Ammonium Compounds

· Phenolics

· Iodophors

· Hypochlorites (such as Clorox Bleach)

· Hydrogen Peroxide

When you have finished the cleaning and disinfecting, seal the room and allow it to dry completely.

Wear Protective Gear

Since black mold can be hazardous to your health, you should wear protective gear while doing that cleanup. For openers, wear a respirator. Second, wear goggles. This will prevent black mold spores from getting into and infecting the delicate structure of your eyes. Third, wear rubber gloves. Finally, be sure to wear clothing that covers your entire body and that can be easily cleaned after you finish removing the mold.

If The Mold Is Extensive

If you have an extensive amount of black mold in your house or basement, it would be best to call a professional mold removal company. However, if you only have small patchy areas, you can remove it as described above and be rid of this nasty stuff!


For More Information on Dustless Concrete Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Bertram Dustless Tile Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Bertram 

How to Get Rid of Mold - Common Causes and Cleaning Techniques

– Entrust is to an Expert

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration

"Invasion of the Mold Spores" - Mold Removal Tips For the Property Owner

From the dawn of time mold has been on this planet. It comes in a variety of forms and colors and is caused by fungus growth. The spores of mold can cause the spread of this organism and certain factors can spur its growth. Mold needs a source of food, dampness, humidity and the spores themselves to be able to evolve.

Mold is present outdoors as well as inside. Typical places that mold grows are ceilings, wallpaper, wood, painted areas and carpets. It is quite normal to find it in places such as the basement or the bathroom. A few types of mold can be toxic and therefore dangerous to human health; this is the best reason to eradicate the problem. People can develop allergies to mold and many of the symptoms of suffering from the effects of mold include a runny nose, sneezing, itchy and red eyes as well as headaches.

There are easy ways in which you can rid your property of mold. In fact something as common and ordinary as vinegar can be used to get rid of mold. You can use a bottle to spray the vinegar directly onto the affected areas like grout in tiles, shower cubicles and the seals on faucets. Mold can grow anywhere in the home so remember to check all areas thoroughly- that unused kitchen cabinet with its food remnants and dampness will be a perfect place for mold to form.

A portable air conditioner is a handy utensil to have. During the hot and humid weather it will help to stop mold growing in your home. The humidity of your property should be kept at approximately 30%-50% to be productive.

In the winter months when it is colder, a dehumidifier is a great asset in the fight against the formation of mold in the home. Again, the humidity level should be maintained around the 30%-50% mark, but should still be at a pleasant level for your room temperature.

One of the commonest places to find mold is in the carpet. If you find that mold has settled on your carpet there are basically two options; you can replace the carpet with wooden flooring, or treat the carpet with baking soda. Leave the baking soda to sit on the carpet for a few hours and then vacuum off.

If the influx of mold is serious, then it may be best to consider calling the professionals to deal with the problem. An assessor can visit your home and identify the type of mold growing. Then a team will use tools such as wet vacuums, dry wipe materials and HEPA vacuums to eradicate the problem. There is a slight possibility that any lingering mold spores in the air may cause it to return, in which case a second treatment may be needed.

There is a serious element to mold being in your home and it should be considered an immediate problem, due to the possible risks to your health. As soon as you spot that mold forming tackle the problem quickly and head on.


For More Information on Travertine Floor Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Belmont Dust Free Wood Floor Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Belmont 

Bleach For Mold Remediation - Good Or Bad Decision?

– Entrust is to an Expert

There is a a lot of information that can be gathered about mold cleaning. Some of them are true and some are nothing but purely air-popped claims. The use of bleach for an effective mold remediation is one of those that causes confusion in today's quest for a mold-free indoor environment.

The dizziness that bleach creates resides on the argument whether the use of it can indeed kill molds or not. Because bleach had been around for like many many years now, a lot believes that yes, the use of it can make a mold removal process effective. But as been said, not everything should be always believed.

Basically, the most appropriate point that can be presented with regards to the use of bleach in mold cleaning is this: bleach can kill molds but not always. There are some mold infestation cases in which any cleaning move is nothing but a futile attempt. It can sometimes produce no result and even in cases that it does, it sure wouldn't be as good as what have been expected.

Instances to which bleach can sure serve well and effective are often on mold infestation on hard and non-porous surfaces such as tiles and concrete. To porous materials on the other hand, purchasing and applying of bleach can cause waste instead of being a help.

So why is it that bleach is not always as effective in mold cleaning as many claim it to be? The following can be of help for better understanding.

  • Bleach is not specifically formulated for a complete mold removal. It is regarded as an all-around cleaner which conjures the idea that it always effectively kill molds. However, this is not entirely true as bleach is largely made up of water that encourages molds to grow. Therefore, bleach can sometimes kill molds but it can not prevent their regrowth.
  • To entirely get rid of molds, their roots must be cut off. Unfortunately, bleach can only reach the external surface and does not go deeper on the root level. This makes it unable to cut the roots which make molds capable of regrowing.
  • Bleach is made of chlorine which is a chemical element. Though it can be useful as a disinfectant, it can also be destructive to human health and the environment. Inhaling chlorine can cause damage to the respiratory system, can lead to coughing and vomiting and can also irritate the eyes. Its major negative contribution to the environment lies on the destruction of the ozone layer.
  • The rather small potential bleach has in removing molds deteriorates fast. Its power can reduce to half when stored or unused within 90 days.
  • When the mold removal process is to be implanted on fabrics, wood or paper, the use of bleach can speed up the deterioration of the item.

In conclusion, bleach can actually work in removing molds. But it then it has some considerable limitations. Those limitations make bleach a not-so-ideal product to for a truly effective mold cleaning process.

"Invasion of the Mold Spores" - Mold Removal Tips For the Property Owner

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration


For More Information on

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Bastrop Allergies

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Bastrop 

How to Get Rid of Mold - Common Causes and Cleaning Techniques

– Entrust is to an Expert

From the dawn of time mold has been on this planet. It comes in a variety of forms and colors and is caused by fungus growth. The spores of mold can cause the spread of this organism and certain factors can spur its growth. Mold needs a source of food, dampness, humidity and the spores themselves to be able to evolve.

Mold is present outdoors as well as inside. Typical places that mold grows are ceilings, wallpaper, wood, painted areas and carpets. It is quite normal to find it in places such as the basement or the bathroom. A few types of mold can be toxic and therefore dangerous to human health; this is the best reason to eradicate the problem. People can develop allergies to mold and many of the symptoms of suffering from the effects of mold include a runny nose, sneezing, itchy and red eyes as well as headaches.

There are easy ways in which you can rid your property of mold. In fact something as common and ordinary as vinegar can be used to get rid of mold. You can use a bottle to spray the vinegar directly onto the affected areas like grout in tiles, shower cubicles and the seals on faucets. Mold can grow anywhere in the home so remember to check all areas thoroughly- that unused kitchen cabinet with its food remnants and dampness will be a perfect place for mold to form.

A portable air conditioner is a handy utensil to have. During the hot and humid weather it will help to stop mold growing in your home. The humidity of your property should be kept at approximately 30%-50% to be productive.

In the winter months when it is colder, a dehumidifier is a great asset in the fight against the formation of mold in the home. Again, the humidity level should be maintained around the 30%-50% mark, but should still be at a pleasant level for your room temperature.

One of the commonest places to find mold is in the carpet. If you find that mold has settled on your carpet there are basically two options; you can replace the carpet with wooden flooring, or treat the carpet with baking soda. Leave the baking soda to sit on the carpet for a few hours and then vacuum off.

If the influx of mold is serious, then it may be best to consider calling the professionals to deal with the problem. An assessor can visit your home and identify the type of mold growing. Then a team will use tools such as wet vacuums, dry wipe materials and HEPA vacuums to eradicate the problem. There is a slight possibility that any lingering mold spores in the air may cause it to return, in which case a second treatment may be needed.

There is a serious element to mold being in your home and it should be considered an immediate problem, due to the possible risks to your health. As soon as you spot that mold forming tackle the problem quickly and head on.

Household Mold

Household mold is considered an environmental annoyance that can cause irritation while breathing. It can make the health of asthma patients worse and can cause allergic problems to sensitive persons. The mold may affect children with several problems such as irritation, allergies, and infections.

Household mold comes in a wide variety of species and forms. It differs in colors, including charcoal, grey, and black. There is variation in toxicity for different species. Among the species, six are common in which three can produce toxins. These six common molds are Stachybotris, Aspergillus, Penicillium, Alternaria, Mucor, and Cladosporium. Stachybotris is a toxic mold that can produce more than 200 poisonous substances. These toxins are autoimmune and can affect the nervous system. Aspergillus is an opportunistic fungus that can cause pathological problems to human beings.

Household mold is found everywhere in day to day households. It can grow anywhere, on tiles, grout, food, fabric, plaster, and wood. The mold grows well at room temperature with humidity. Other necessary items for mold growth are adequate moisture and nutrients. These items are obtained from the surface where the mold grows. The mold can destroy the material on which it grows.

There are certain ways to identify and control the presence of household mold. First, check whether there is any sign of moisture or mold at home. A musty smell in a room is an indication of mold growth. If there is any sign of mold, then find the particular surface of the mold growth and clean the surface. Additionally, remove the sources of moisture and keep the moisture content in the rooms at a desired level. Water should not be allowed to stand in drip pans of refrigerators and air conditioners.

Secondly, check whether there is any leakage problem, water stains or water discoloration from taps, especially in the bathrooms and kitchens. If these problems are found, rectify them immediately to prevent the mold growth. Even if the mold is removed, but the water problem is not solved, then the mold will appear again on the same surface.


For More Information on Travertine Floor Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Port Mansfield Concrete Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Port Mansfield 

How to Identify Mold With These 3 Mold Sampling Techniques

– Entrust is to an Expert

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration

Household Mold

There is now a lot of evidence to connect black mold with Sudden Infant Death Syndrome (SIDS) and miscarriage. The death of an infant can be devastating for a family so can losing a baby due to miscarriage. It is vital that any steps needed to prevent these awful events should be taken.

It is not just the fact that black mold is toxic that means that it is dangerous to infants. One way that it is believed to work is that black mold spores end up in baby's mattress and they releases harmful chemicals from the mattress into the air and the baby breathes this lethal gas. This process is believed to be responsible for many cases of SIDS.

Black mold has also been associated with miscarriage. It seems that exposure to mold toxin could be the cause of many women losing their baby during pregnancy. Not all mold is toxic, but it is almost impossible to tell this by just looking. The usual way to determine toxicity is by sending the mold to be tested in a laboratory. This is why it is probably a good idea that pregnant women treat all mold as if it were toxic and keeping well away from it.

The best way to stop black mold from becoming an issue for infants and those who are pregnant is to prevent it occurring in your home, and if you do have it to quickly eliminate the problem. This can be a difficult issue for those who are living in rented accommodation and have a landlord who just won't do anything about your mold problem. The advice here is to find somewhere else to stay either permanently or until the problem is fixed.

The real danger comes when black mold is growing and you are not even aware of it. Mold likes damp places that are poorly ventilated so make sure you check your attic and basement and any other cubby holes. Of course, if you are pregnant you will want someone else to conduct this search for you. In most instances eradicating the mold will be fairly straight forward so long as you discover it all. Pregnant women should not be involved in any part of the cleaning up process, but be kept well away from the area in case toxic spores are released into the air. When the mold is completely removed you will then need to take measures to make sure it doesn't back again.


For More Information on Clean Air Floor Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

South Padre Island Dust Free Tile Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

South Padre Island 

Remove Black Mold From Your Bathroom Walls

– Entrust is to an Expert

Think you've got mold? Mold sampling is the first thing to do. There are several ways to collect and analyze mold samples. You can take a surface sample, air sample or use a do-it-yourself kit.

Surface Sampling

The most basic type of mold sampling is surface sampling. If you've got visible mold in your house, you can take a sample of it, and analyze it to see if it is toxic or not.

There are a number of techniques for taking samples. One method is to use clear tape. Stick the tape to the surface, peel it off, and drop the tape into a plastic bag with the mold sample stuck to it. This sample can then be analyzed.

You can also swab the area for samples. You can take a regular Q-tip and swab the area 3-4 times, then drop the samples into a bag for further inspection.

Air Sampling

Air sampling is the best way to check your mold problem. The results will tell you if you've got airborne mold spores already floating around your house, wreaking havoc on everybody's lungs.

The inspector uses a pump and spore trap. The pump sucks up air and holds it in the spore trap where it can be analyzed. It pumps not only air, but also bits of dust and insects which can reveal more accurately the amount of spores in the air.

This is the most reliable way to check for mold problems because it looks for the spores themselves. The inspector takes samples from various parts of the house, as well as inside walls and under floors. Often, mold infestations aren't visible to the naked eye.

At-Home Sampling Kits

You can buy at-home mold sampling kits to use yourself. These are easy and give quick results. The only downside is that they don't do as thorough a job as a professional mold inspector. There is some margin for errors.

Mold sampling is the first step in ridding your home of mold. If you think you have a problem, check it out and clean it up immediately.

Household Mold

There is now a lot of evidence to connect black mold with Sudden Infant Death Syndrome (SIDS) and miscarriage. The death of an infant can be devastating for a family so can losing a baby due to miscarriage. It is vital that any steps needed to prevent these awful events should be taken.

It is not just the fact that black mold is toxic that means that it is dangerous to infants. One way that it is believed to work is that black mold spores end up in baby's mattress and they releases harmful chemicals from the mattress into the air and the baby breathes this lethal gas. This process is believed to be responsible for many cases of SIDS.

Black mold has also been associated with miscarriage. It seems that exposure to mold toxin could be the cause of many women losing their baby during pregnancy. Not all mold is toxic, but it is almost impossible to tell this by just looking. The usual way to determine toxicity is by sending the mold to be tested in a laboratory. This is why it is probably a good idea that pregnant women treat all mold as if it were toxic and keeping well away from it.

The best way to stop black mold from becoming an issue for infants and those who are pregnant is to prevent it occurring in your home, and if you do have it to quickly eliminate the problem. This can be a difficult issue for those who are living in rented accommodation and have a landlord who just won't do anything about your mold problem. The advice here is to find somewhere else to stay either permanently or until the problem is fixed.

The real danger comes when black mold is growing and you are not even aware of it. Mold likes damp places that are poorly ventilated so make sure you check your attic and basement and any other cubby holes. Of course, if you are pregnant you will want someone else to conduct this search for you. In most instances eradicating the mold will be fairly straight forward so long as you discover it all. Pregnant women should not be involved in any part of the cleaning up process, but be kept well away from the area in case toxic spores are released into the air. When the mold is completely removed you will then need to take measures to make sure it doesn't back again.


For More Information on Dust Free Wood Floor Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal