Granbury Travertine Floor Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Granbury 

Remove Black Mold From Your Bathroom Walls

– Entrust is to an Expert

Mold spores. They almost sound like alien invaders from a 1950's sci-fi movie --"Attack of the Killer Mold Spores!" But that description may not be too far off the mark. Mold is dangerous. It can be more prevalent and can cause more health problems than termites, carbon monoxide, asbestos, or radon. In fact, mold is everywhere and impossible to get rid of in nature. According to the EPA website, "There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture." From one third to one half of all buildings in the United States have the damp conditions necessary to facilitate the growth of mold, according to the Consumer Product Safety Commission.

Mold and mold spores can cause serious health problems and, in the case of someone with mold sensitivities, even death. Many people are vaguely aware of the health concerns when it comes to mold but most do not know that mold can also cause serious damage to a house or building (similar to a termite infestation.) When it comes to protecting your family and your home, fighting and preventing mold should be at the top of every homeowner's list.

WHAT IS MOLD?

The simple answer: molds are part of the fungi kingdom, similar to yeasts or mushrooms (the antibiotic Penicillin is actually a mold.)Mold is a living organism, a part of nature, and even has a beneficial function - it breaks down all of our dead organic matter. Mold reproduces by releasing tiny spores, invisible to the naked eye, into the air. These spores land in moist areas and begin to grow and spread. While there are hundreds of thousands of varieties of mold, none would exist without the presence of moisture, air, and something to feed on. Since mold will always exist outdoors, it is important to control the one ingredient a homeowner doesn't need inside the house - moisture.

Mold can grow on rotting wood, grass, weeds, and compost piles. The problem is that it can also grow where you don't want it to - indoors. It can be found on food or clothing, in bathrooms and attics and damp basements, on carpeting, and even inside the walls of a house. Mold can feed on the wood in the wall, breaking down the materials as it spreads unseen throughout a house. As the mold digests organic material, it continues to spread to find new food sources.

Spotting mold can be easy, if the mold colony is visible. Mold comes in a variety of colors (including white, black, green, gray, brown, and more), bunching as spots or discolorations. If the mold is not visible, someone may not recognize mold is present until it is late in the process. People discover mold when there is physical damage to a structure or an increase in musty smells. Sometimes mold won't be found until the occupants experience health problems. By then, it may be too late. Whenever a house or building has an overexposure to moisture, it is important to inspect for mold. Moisture overexposure can come from many sources, including:

o Floods

o Roofs or basements that leak

o Irrigation or fire sprinklers

o Shower or bath water

o Sink or sewer overflow

o Humidifiers

o Plumbing leaks

WHY SHOULD I WORRY ABOUT MOLD?

There are two main reasons to worry about the spread of mold in a building. The most important consideration - mold can cause health problems. The second consideration - property damage. Frank Foreman, President & CEO of NO ODOR, Inc, a mold remediation company, believes mold is coming to the forefront because everyone is learning that mold damage can affect property value.

Let's start with the health issues. Molds produce allergens that can cause reactions such as sneezing, runny noses, even asthma attacks in those allergic to it. It can even cause irritation to the nose, throat, lungs, and eyes to those who are not allergic. Certain molds can also release toxins (mycotoxins) that cause more serious problems. According to the Mold Help Organization, exposure to these mycotoxins could cause people "to suffer from a myriad of serious symptoms and illnesses such as chronic bronchitis, learning disabilities, mental deficiencies, heart problems, cancer, multiple sclerosis, chronic fatigue, lupus, fibromyalgia, rheumatoid arthritis, multiple chemical sensitivity, bleeding lungs and much more" (http://www.mold-help.org/content/view/478/).

Because many people are not as aware or concerned about the health threats of mold, it is also important to consider the damage it can cause to property. Everyone tends to pay more attention to a problem when it affects the wallet. A home or business is the largest investment most people have. A colony or colonies of mold can cause severe devastation. According to the EPA website, "If you already have a mold problem - act quickly. Mold damages what it grows on. The longer it grows, the more damage it can cause" (http://www.epa.gov/mold/moldcleanup.html).

Mold can cause structural damage to a building, because it feeds on and breaks down the organic matter (wood, mostly) within the structure. When mold grows in the walls, on insulation, or under carpeting, these items must be removed from the building. In addition to the damage caused to the building, mold may destroy personal items in the home. It can attach to personal property which may be very difficult or impossible to clean. Often the item will have to be destroyed because the mold cannot be completely removed.

WHAT CAN BE DONE ABOUT THE MOLD?

For the most part, since mold is everywhere, it is impossible to completely avoid all indoor molds. The key to preventing mold is to control the moisture levels indoors. The EPA website states, "If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don't fix the water problem, then, most likely, the mold problem will come back" (http://www.epa.gov/mold/moldbasics.html).

For small areas, usually a moldy section of 9 to 10 square feet, the home or business owner can usually clean up the mold themselves. For larger areas, it is important to hire a professional mold removal contractor to make sure the problem is taken care of safely.

If you have a small patch of black, green or gray colored spots, Frank Foreman, of NO ODOR, Inc., has a smart tip to determine whether or not it is mold: put some hydrogen peroxide on the growth and watch the reaction. Almost everyone has one of those brown bottles of the 3% hydrogen peroxide solution in their medicine cabinet, so he suggests putting it in a clean spray bottle and spraying the colored spots. If the solution runs down the wall and there is no reaction, then the spots are not growths of mold (it could possibly just be dirt.) Since mold is a living organism, when sprayed with the hydrogen peroxide, there will be an oxidation process. If you hit it and the growth starts to foam up with white foam, then you know you are dealing with mold.

For small amounts of mold, many sources recommend using a combination of water and detergent to clean the moldy surfaces. However, Frank Foreman recommends using only products that are approved by the EPA to kill mold. He further states that care and precaution need to be taken when doing the cleanup by an individual. "Mold is a living organism and it can travel easily when disturbed. Someone may wash away half of the mold and the other half might release mold spores that can escape to another source of moisture in the home. Or worse, into the A/C or heating system which can spread mold spores to every room in the house," claims Foreman.

Foreman also suggests that someone with a mold problem should really educate themselves before hiring a professional to remove toxic mold. "The mold removal industry is completely unregulated. There are no federal, state, or local regulations that govern mold removal professionals." This means, according to Foreman, with no standards, there is no way to prove the job was done or that it is done right. "Only seventy to eighty percent of all mold removal jobs are done right, which means the property owner is going to have residual problems."

He says that it is important to shop around, to get references, and to scan the Internet to learn as much as possible about toxic mold and mold removal. "Education is the key. Learn the basics so you can talk to the remediation expert and you'll have a good idea if he or she really knows what they're doing."

Mold removal methods vary from company to company. But the process can be complicated and expensive. For example, if a 10' x 10' bedroom has two walls infested with mold, it may be necessary to seal off that portion of the house, remove all wall boards until there are no more visible signs of mold growth. Next, the remediation pro will have to hand sand away the mold. Then, a mold killing detergent will be washed over the surface. The exposed area will then be HEPA vacuumed to remove remnant spores. After the area is tested to make sure there is no more mold, new walls will have to be built back up and painted. As you can see, the process can be time consuming and very expensive. However, to save on excessive destruction, some professionals have been employing fiber optic technology to view within the walls or ceilings, looking for mold growth, before tearing down all the drywall.

If you have had a flooding problem or a major water leak, it is also important to contact your insurance company. Many do not know that insurance may cover the mold removal as well. However, most insurance companies are starting to put limits on mold removal coverage (sometimes keeping caps at $5000 to $10,000.) While it may sound like a lot of money, the insurance company will be giving you money to fix the damage and remove the mold. The mold removal process may cost more than repairing the damage caused by the water. For example, if the roof of a house comes off during a storm and causes water damage to the house, the insurance company may give a lump sum to cover the repairs to the roof, the damage inside, and the mold problem. By accepting their lump sum, you have to pay to replace the roof and damage from water but the money also has to cover the costs to remove the mold that may come days, weeks, or months later.

HOW CAN I PREVENT MOLD FROM COMING BACK?

Once you have removed the entire mold infestation from your property, it is still important to control moisture levels in the structure.

- If there is any kind of flooding, it is imperative you remove the water within 24 to 48 hours.

- Whenever possible, move wet items to a dry, well-ventilated place or outside to speed up the drying process. Remove drywall up to the height of the water level. Remove carpeting as soon as possible.

- Keep the indoor humidity low. If possible, keep below 60 percent relative humidity.

- If condensation or moisture collects on windows, walls or water pipes, dry the wet surface and reduce the moisture. Condensation can be a sign of high humidity.

- Keep gutters clean and make sure water drains away from the building to prevent it from collecting around the foundation.

- Run or install venting fans in high moisture areas, like the bathroom.

- Run a dehumidifier in moist areas, such as a basement or bathroom.

- Ventilating areas can help reduce moisture, as well as keeping the temperature up or the air conditioner on. However, aim the air conditioning vents away from the condensing surfaces to prevent cold spots where moisture condensation can occur.

- Adding thermal insulation to walls, ceilings, and pipes can help, too (in fact, rust spots on any water pipes could be an indication there is too much moisture in a room. Adding insulation to the pipes is a good idea.)

Mold can be a very serious problem in homes and businesses and it is important to take care of the problem as soon as possible. The consequences to health and property can be severe. While remediation of mold can be expensive, the damage mold can cause could be even worse. Frank Foreman has seen many cases where it is actually cheaper for the homeowner to knock down and rebuild an entire house rather than remove the existing mold infestation.

Keep in mind some of the potential signs that mold may be growing within a property:

o Unexplained discoloration on a surface

o Musty or earthy odor

o Dark spots on or around vents

o Water stains anywhere

o Peeling or curling of floors or wallpaper

Do your homework and hire a professional to handle even moderate mold problems as soon as possible. If one is not sure where to look for a mold removal and remediation specialist, there are services that can help everyone find a local professional.

Whenever a home or business owner believes there are signs of mold growth within their property, he or she should contact a professional as soon as possible to avoid future problems or costs. Attack those "Killer Mold Spores" before your own personal home invasion gets any worse.

Household Mold

There is now a lot of evidence to connect black mold with Sudden Infant Death Syndrome (SIDS) and miscarriage. The death of an infant can be devastating for a family so can losing a baby due to miscarriage. It is vital that any steps needed to prevent these awful events should be taken.

It is not just the fact that black mold is toxic that means that it is dangerous to infants. One way that it is believed to work is that black mold spores end up in baby's mattress and they releases harmful chemicals from the mattress into the air and the baby breathes this lethal gas. This process is believed to be responsible for many cases of SIDS.

Black mold has also been associated with miscarriage. It seems that exposure to mold toxin could be the cause of many women losing their baby during pregnancy. Not all mold is toxic, but it is almost impossible to tell this by just looking. The usual way to determine toxicity is by sending the mold to be tested in a laboratory. This is why it is probably a good idea that pregnant women treat all mold as if it were toxic and keeping well away from it.

The best way to stop black mold from becoming an issue for infants and those who are pregnant is to prevent it occurring in your home, and if you do have it to quickly eliminate the problem. This can be a difficult issue for those who are living in rented accommodation and have a landlord who just won't do anything about your mold problem. The advice here is to find somewhere else to stay either permanently or until the problem is fixed.

The real danger comes when black mold is growing and you are not even aware of it. Mold likes damp places that are poorly ventilated so make sure you check your attic and basement and any other cubby holes. Of course, if you are pregnant you will want someone else to conduct this search for you. In most instances eradicating the mold will be fairly straight forward so long as you discover it all. Pregnant women should not be involved in any part of the cleaning up process, but be kept well away from the area in case toxic spores are released into the air. When the mold is completely removed you will then need to take measures to make sure it doesn't back again.


For More Information on Dust Free Wood Floor Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Midlothian Dust Free Concrete Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Midlothian 

Remove Black Mold From Your Bathroom Walls

– Entrust is to an Expert

From the dawn of time mold has been on this planet. It comes in a variety of forms and colors and is caused by fungus growth. The spores of mold can cause the spread of this organism and certain factors can spur its growth. Mold needs a source of food, dampness, humidity and the spores themselves to be able to evolve.

Mold is present outdoors as well as inside. Typical places that mold grows are ceilings, wallpaper, wood, painted areas and carpets. It is quite normal to find it in places such as the basement or the bathroom. A few types of mold can be toxic and therefore dangerous to human health; this is the best reason to eradicate the problem. People can develop allergies to mold and many of the symptoms of suffering from the effects of mold include a runny nose, sneezing, itchy and red eyes as well as headaches.

There are easy ways in which you can rid your property of mold. In fact something as common and ordinary as vinegar can be used to get rid of mold. You can use a bottle to spray the vinegar directly onto the affected areas like grout in tiles, shower cubicles and the seals on faucets. Mold can grow anywhere in the home so remember to check all areas thoroughly- that unused kitchen cabinet with its food remnants and dampness will be a perfect place for mold to form.

A portable air conditioner is a handy utensil to have. During the hot and humid weather it will help to stop mold growing in your home. The humidity of your property should be kept at approximately 30%-50% to be productive.

In the winter months when it is colder, a dehumidifier is a great asset in the fight against the formation of mold in the home. Again, the humidity level should be maintained around the 30%-50% mark, but should still be at a pleasant level for your room temperature.

One of the commonest places to find mold is in the carpet. If you find that mold has settled on your carpet there are basically two options; you can replace the carpet with wooden flooring, or treat the carpet with baking soda. Leave the baking soda to sit on the carpet for a few hours and then vacuum off.

If the influx of mold is serious, then it may be best to consider calling the professionals to deal with the problem. An assessor can visit your home and identify the type of mold growing. Then a team will use tools such as wet vacuums, dry wipe materials and HEPA vacuums to eradicate the problem. There is a slight possibility that any lingering mold spores in the air may cause it to return, in which case a second treatment may be needed.

There is a serious element to mold being in your home and it should be considered an immediate problem, due to the possible risks to your health. As soon as you spot that mold forming tackle the problem quickly and head on.

Household Mold

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration


For More Information on Chronic Silicosis

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Azle Dustless Concrete Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Azle 

"Invasion of the Mold Spores" - Mold Removal Tips For the Property Owner

– Entrust is to an Expert

Think you've got mold? Mold sampling is the first thing to do. There are several ways to collect and analyze mold samples. You can take a surface sample, air sample or use a do-it-yourself kit.

Surface Sampling

The most basic type of mold sampling is surface sampling. If you've got visible mold in your house, you can take a sample of it, and analyze it to see if it is toxic or not.

There are a number of techniques for taking samples. One method is to use clear tape. Stick the tape to the surface, peel it off, and drop the tape into a plastic bag with the mold sample stuck to it. This sample can then be analyzed.

You can also swab the area for samples. You can take a regular Q-tip and swab the area 3-4 times, then drop the samples into a bag for further inspection.

Air Sampling

Air sampling is the best way to check your mold problem. The results will tell you if you've got airborne mold spores already floating around your house, wreaking havoc on everybody's lungs.

The inspector uses a pump and spore trap. The pump sucks up air and holds it in the spore trap where it can be analyzed. It pumps not only air, but also bits of dust and insects which can reveal more accurately the amount of spores in the air.

This is the most reliable way to check for mold problems because it looks for the spores themselves. The inspector takes samples from various parts of the house, as well as inside walls and under floors. Often, mold infestations aren't visible to the naked eye.

At-Home Sampling Kits

You can buy at-home mold sampling kits to use yourself. These are easy and give quick results. The only downside is that they don't do as thorough a job as a professional mold inspector. There is some margin for errors.

Mold sampling is the first step in ridding your home of mold. If you think you have a problem, check it out and clean it up immediately.

"Invasion of the Mold Spores" - Mold Removal Tips For the Property Owner

Mold spores. They almost sound like alien invaders from a 1950's sci-fi movie --"Attack of the Killer Mold Spores!" But that description may not be too far off the mark. Mold is dangerous. It can be more prevalent and can cause more health problems than termites, carbon monoxide, asbestos, or radon. In fact, mold is everywhere and impossible to get rid of in nature. According to the EPA website, "There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture." From one third to one half of all buildings in the United States have the damp conditions necessary to facilitate the growth of mold, according to the Consumer Product Safety Commission.

Mold and mold spores can cause serious health problems and, in the case of someone with mold sensitivities, even death. Many people are vaguely aware of the health concerns when it comes to mold but most do not know that mold can also cause serious damage to a house or building (similar to a termite infestation.) When it comes to protecting your family and your home, fighting and preventing mold should be at the top of every homeowner's list.

WHAT IS MOLD?

The simple answer: molds are part of the fungi kingdom, similar to yeasts or mushrooms (the antibiotic Penicillin is actually a mold.)Mold is a living organism, a part of nature, and even has a beneficial function - it breaks down all of our dead organic matter. Mold reproduces by releasing tiny spores, invisible to the naked eye, into the air. These spores land in moist areas and begin to grow and spread. While there are hundreds of thousands of varieties of mold, none would exist without the presence of moisture, air, and something to feed on. Since mold will always exist outdoors, it is important to control the one ingredient a homeowner doesn't need inside the house - moisture.

Mold can grow on rotting wood, grass, weeds, and compost piles. The problem is that it can also grow where you don't want it to - indoors. It can be found on food or clothing, in bathrooms and attics and damp basements, on carpeting, and even inside the walls of a house. Mold can feed on the wood in the wall, breaking down the materials as it spreads unseen throughout a house. As the mold digests organic material, it continues to spread to find new food sources.

Spotting mold can be easy, if the mold colony is visible. Mold comes in a variety of colors (including white, black, green, gray, brown, and more), bunching as spots or discolorations. If the mold is not visible, someone may not recognize mold is present until it is late in the process. People discover mold when there is physical damage to a structure or an increase in musty smells. Sometimes mold won't be found until the occupants experience health problems. By then, it may be too late. Whenever a house or building has an overexposure to moisture, it is important to inspect for mold. Moisture overexposure can come from many sources, including:

o Floods

o Roofs or basements that leak

o Irrigation or fire sprinklers

o Shower or bath water

o Sink or sewer overflow

o Humidifiers

o Plumbing leaks

WHY SHOULD I WORRY ABOUT MOLD?

There are two main reasons to worry about the spread of mold in a building. The most important consideration - mold can cause health problems. The second consideration - property damage. Frank Foreman, President & CEO of NO ODOR, Inc, a mold remediation company, believes mold is coming to the forefront because everyone is learning that mold damage can affect property value.

Let's start with the health issues. Molds produce allergens that can cause reactions such as sneezing, runny noses, even asthma attacks in those allergic to it. It can even cause irritation to the nose, throat, lungs, and eyes to those who are not allergic. Certain molds can also release toxins (mycotoxins) that cause more serious problems. According to the Mold Help Organization, exposure to these mycotoxins could cause people "to suffer from a myriad of serious symptoms and illnesses such as chronic bronchitis, learning disabilities, mental deficiencies, heart problems, cancer, multiple sclerosis, chronic fatigue, lupus, fibromyalgia, rheumatoid arthritis, multiple chemical sensitivity, bleeding lungs and much more" (http://www.mold-help.org/content/view/478/).

Because many people are not as aware or concerned about the health threats of mold, it is also important to consider the damage it can cause to property. Everyone tends to pay more attention to a problem when it affects the wallet. A home or business is the largest investment most people have. A colony or colonies of mold can cause severe devastation. According to the EPA website, "If you already have a mold problem - act quickly. Mold damages what it grows on. The longer it grows, the more damage it can cause" (http://www.epa.gov/mold/moldcleanup.html).

Mold can cause structural damage to a building, because it feeds on and breaks down the organic matter (wood, mostly) within the structure. When mold grows in the walls, on insulation, or under carpeting, these items must be removed from the building. In addition to the damage caused to the building, mold may destroy personal items in the home. It can attach to personal property which may be very difficult or impossible to clean. Often the item will have to be destroyed because the mold cannot be completely removed.

WHAT CAN BE DONE ABOUT THE MOLD?

For the most part, since mold is everywhere, it is impossible to completely avoid all indoor molds. The key to preventing mold is to control the moisture levels indoors. The EPA website states, "If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don't fix the water problem, then, most likely, the mold problem will come back" (http://www.epa.gov/mold/moldbasics.html).

For small areas, usually a moldy section of 9 to 10 square feet, the home or business owner can usually clean up the mold themselves. For larger areas, it is important to hire a professional mold removal contractor to make sure the problem is taken care of safely.

If you have a small patch of black, green or gray colored spots, Frank Foreman, of NO ODOR, Inc., has a smart tip to determine whether or not it is mold: put some hydrogen peroxide on the growth and watch the reaction. Almost everyone has one of those brown bottles of the 3% hydrogen peroxide solution in their medicine cabinet, so he suggests putting it in a clean spray bottle and spraying the colored spots. If the solution runs down the wall and there is no reaction, then the spots are not growths of mold (it could possibly just be dirt.) Since mold is a living organism, when sprayed with the hydrogen peroxide, there will be an oxidation process. If you hit it and the growth starts to foam up with white foam, then you know you are dealing with mold.

For small amounts of mold, many sources recommend using a combination of water and detergent to clean the moldy surfaces. However, Frank Foreman recommends using only products that are approved by the EPA to kill mold. He further states that care and precaution need to be taken when doing the cleanup by an individual. "Mold is a living organism and it can travel easily when disturbed. Someone may wash away half of the mold and the other half might release mold spores that can escape to another source of moisture in the home. Or worse, into the A/C or heating system which can spread mold spores to every room in the house," claims Foreman.

Foreman also suggests that someone with a mold problem should really educate themselves before hiring a professional to remove toxic mold. "The mold removal industry is completely unregulated. There are no federal, state, or local regulations that govern mold removal professionals." This means, according to Foreman, with no standards, there is no way to prove the job was done or that it is done right. "Only seventy to eighty percent of all mold removal jobs are done right, which means the property owner is going to have residual problems."

He says that it is important to shop around, to get references, and to scan the Internet to learn as much as possible about toxic mold and mold removal. "Education is the key. Learn the basics so you can talk to the remediation expert and you'll have a good idea if he or she really knows what they're doing."

Mold removal methods vary from company to company. But the process can be complicated and expensive. For example, if a 10' x 10' bedroom has two walls infested with mold, it may be necessary to seal off that portion of the house, remove all wall boards until there are no more visible signs of mold growth. Next, the remediation pro will have to hand sand away the mold. Then, a mold killing detergent will be washed over the surface. The exposed area will then be HEPA vacuumed to remove remnant spores. After the area is tested to make sure there is no more mold, new walls will have to be built back up and painted. As you can see, the process can be time consuming and very expensive. However, to save on excessive destruction, some professionals have been employing fiber optic technology to view within the walls or ceilings, looking for mold growth, before tearing down all the drywall.

If you have had a flooding problem or a major water leak, it is also important to contact your insurance company. Many do not know that insurance may cover the mold removal as well. However, most insurance companies are starting to put limits on mold removal coverage (sometimes keeping caps at $5000 to $10,000.) While it may sound like a lot of money, the insurance company will be giving you money to fix the damage and remove the mold. The mold removal process may cost more than repairing the damage caused by the water. For example, if the roof of a house comes off during a storm and causes water damage to the house, the insurance company may give a lump sum to cover the repairs to the roof, the damage inside, and the mold problem. By accepting their lump sum, you have to pay to replace the roof and damage from water but the money also has to cover the costs to remove the mold that may come days, weeks, or months later.

HOW CAN I PREVENT MOLD FROM COMING BACK?

Once you have removed the entire mold infestation from your property, it is still important to control moisture levels in the structure.

- If there is any kind of flooding, it is imperative you remove the water within 24 to 48 hours.

- Whenever possible, move wet items to a dry, well-ventilated place or outside to speed up the drying process. Remove drywall up to the height of the water level. Remove carpeting as soon as possible.

- Keep the indoor humidity low. If possible, keep below 60 percent relative humidity.

- If condensation or moisture collects on windows, walls or water pipes, dry the wet surface and reduce the moisture. Condensation can be a sign of high humidity.

- Keep gutters clean and make sure water drains away from the building to prevent it from collecting around the foundation.

- Run or install venting fans in high moisture areas, like the bathroom.

- Run a dehumidifier in moist areas, such as a basement or bathroom.

- Ventilating areas can help reduce moisture, as well as keeping the temperature up or the air conditioner on. However, aim the air conditioning vents away from the condensing surfaces to prevent cold spots where moisture condensation can occur.

- Adding thermal insulation to walls, ceilings, and pipes can help, too (in fact, rust spots on any water pipes could be an indication there is too much moisture in a room. Adding insulation to the pipes is a good idea.)

Mold can be a very serious problem in homes and businesses and it is important to take care of the problem as soon as possible. The consequences to health and property can be severe. While remediation of mold can be expensive, the damage mold can cause could be even worse. Frank Foreman has seen many cases where it is actually cheaper for the homeowner to knock down and rebuild an entire house rather than remove the existing mold infestation.

Keep in mind some of the potential signs that mold may be growing within a property:

o Unexplained discoloration on a surface

o Musty or earthy odor

o Dark spots on or around vents

o Water stains anywhere

o Peeling or curling of floors or wallpaper

Do your homework and hire a professional to handle even moderate mold problems as soon as possible. If one is not sure where to look for a mold removal and remediation specialist, there are services that can help everyone find a local professional.

Whenever a home or business owner believes there are signs of mold growth within their property, he or she should contact a professional as soon as possible to avoid future problems or costs. Attack those "Killer Mold Spores" before your own personal home invasion gets any worse.


For More Information on Ceramic Tile Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Centralia Allergies

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Centralia 

Remove Black Mold From Your Bathroom Walls

– Entrust is to an Expert

How To Get Rid Of Black Mold

Black mold is a nasty form of mold that can cause serious health problems. It can cause you to experience symptoms related to upper respiratory tract issues such as coughing and wheezing. It can even cause you to develop a condition called hypersensitivity pneumonitis if you are susceptible to this condition. In fact, there is evidence that links indoor mold exposure to respiratory illness in children that are otherwise healthy. Also, people with Chronic Obstructive Pulmonary Disease (COPD) are at risk for developing fungal infections in their lungs.

Getting Rid Of A Nuisance Problem

If you catch the black mold early and before it becomes widespread, it's relatively easy to eliminate. If the mold is on a hard surface you can get rid of it with a thorough cleaning using a commercial product or by using a solution made with a cup of bleach to 1 gallon of water.

Unfortunately, if the black mold is on some porous material such as ceiling tiles, drywall or carpet you should actually throw the material away. Since you can actually have an allergic reaction to even dead mold, you need to make sure you properly clean and dry the area. If you don't clean and dry it completely and there is still moisture present, the black mold could come back.

Cleaning The Black Mold Yourself

If you choose to clean up the black mold yourself using bleach, here are some things you need to know.

1. Never mix the bleach with other household cleaners or ammonia. This can produce dangerous, toxic fumes.

2. Be sure to open doors and windows so that you have a good supply of fresh air.

3. Wear protective eyewear and non-porous gloves.

4. If the area you need to clean is more than 10 square feet, you should consult the Environmental Protection Agency's Guide to Mold Remediation in Schools and Commercial Buildings. This guide may be focused on commercial buildings and schools but applies to other building types as well, including your home.

If you are using bleach or some other commercial cleaning product, be sure to follow all the manufacturer's instructions for its use.

How To Do The Cleanup

Begin by lightly misting the area to be cleaned with water. Next, scrub the mold with warm soapy water or the bleach mixture described above. When you have cleaned off all the black mold, you will need to spray the area with a disinfectant in order to kill any remaining spores that may not be visible.

Here are some of the best disinfectants you can use.

· Alcohols

· Quaternary Ammonium Compounds

· Phenolics

· Iodophors

· Hypochlorites (such as Clorox Bleach)

· Hydrogen Peroxide

When you have finished the cleaning and disinfecting, seal the room and allow it to dry completely.

Wear Protective Gear

Since black mold can be hazardous to your health, you should wear protective gear while doing that cleanup. For openers, wear a respirator. Second, wear goggles. This will prevent black mold spores from getting into and infecting the delicate structure of your eyes. Third, wear rubber gloves. Finally, be sure to wear clothing that covers your entire body and that can be easily cleaned after you finish removing the mold.

If The Mold Is Extensive

If you have an extensive amount of black mold in your house or basement, it would be best to call a professional mold removal company. However, if you only have small patchy areas, you can remove it as described above and be rid of this nasty stuff!

Household Mold

How To Get Rid Of Black Mold

Black mold is a nasty form of mold that can cause serious health problems. It can cause you to experience symptoms related to upper respiratory tract issues such as coughing and wheezing. It can even cause you to develop a condition called hypersensitivity pneumonitis if you are susceptible to this condition. In fact, there is evidence that links indoor mold exposure to respiratory illness in children that are otherwise healthy. Also, people with Chronic Obstructive Pulmonary Disease (COPD) are at risk for developing fungal infections in their lungs.

Getting Rid Of A Nuisance Problem

If you catch the black mold early and before it becomes widespread, it's relatively easy to eliminate. If the mold is on a hard surface you can get rid of it with a thorough cleaning using a commercial product or by using a solution made with a cup of bleach to 1 gallon of water.

Unfortunately, if the black mold is on some porous material such as ceiling tiles, drywall or carpet you should actually throw the material away. Since you can actually have an allergic reaction to even dead mold, you need to make sure you properly clean and dry the area. If you don't clean and dry it completely and there is still moisture present, the black mold could come back.

Cleaning The Black Mold Yourself

If you choose to clean up the black mold yourself using bleach, here are some things you need to know.

1. Never mix the bleach with other household cleaners or ammonia. This can produce dangerous, toxic fumes.

2. Be sure to open doors and windows so that you have a good supply of fresh air.

3. Wear protective eyewear and non-porous gloves.

4. If the area you need to clean is more than 10 square feet, you should consult the Environmental Protection Agency's Guide to Mold Remediation in Schools and Commercial Buildings. This guide may be focused on commercial buildings and schools but applies to other building types as well, including your home.

If you are using bleach or some other commercial cleaning product, be sure to follow all the manufacturer's instructions for its use.

How To Do The Cleanup

Begin by lightly misting the area to be cleaned with water. Next, scrub the mold with warm soapy water or the bleach mixture described above. When you have cleaned off all the black mold, you will need to spray the area with a disinfectant in order to kill any remaining spores that may not be visible.

Here are some of the best disinfectants you can use.

· Alcohols

· Quaternary Ammonium Compounds

· Phenolics

· Iodophors

· Hypochlorites (such as Clorox Bleach)

· Hydrogen Peroxide

When you have finished the cleaning and disinfecting, seal the room and allow it to dry completely.

Wear Protective Gear

Since black mold can be hazardous to your health, you should wear protective gear while doing that cleanup. For openers, wear a respirator. Second, wear goggles. This will prevent black mold spores from getting into and infecting the delicate structure of your eyes. Third, wear rubber gloves. Finally, be sure to wear clothing that covers your entire body and that can be easily cleaned after you finish removing the mold.

If The Mold Is Extensive

If you have an extensive amount of black mold in your house or basement, it would be best to call a professional mold removal company. However, if you only have small patchy areas, you can remove it as described above and be rid of this nasty stuff!


For More Information on Chronic Silicosis

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Kirvin Dust Control

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Kirvin 

Bleach For Mold Remediation - Good Or Bad Decision?

– Entrust is to an Expert

Before a person ever decides to search for the best mold inspection company in their area, they should first know a few facts:

1. In the author's opinion, every house on the planet has mold in it. Mold is a member of the Fungi family and exists naturally in our environment. It is airborne and enters our houses whenever a door or window is open and in numerous other ways.
2. Inside of a house, mold will not be a problem unless it has been exposed to water for more than 48-72 hours. So, if you have seen, or know of evidence of water inside your house and you suspect that it has been there for at least 48 hours, you are most certain to have harmful (toxic) mold.
3. Even if you can't see any water, it still may be lurking behind your walls, sinks, or tubs; perhaps under windows or other locations. If you can smell a musty or unpleasant odor (some in the family may detect it while others can't), you have a harmful mold problem.
4. If you or other members of your house have asthma, other respiratory problems, coughing, runny nose or eyes, headaches, or tend to feel much better when you are away from the house and worse when you are in it, you almost certainly have a mold problem.

Knowing that you likely have a mold problem but not knowing what to do next, speaks volumes in favor of hiring a professional. But which one? You could likely have several mold inspection companies to chose from on sites like Yahoo or Google; but how does a homeowner find the best one for their needs?

My advice is: First I recommend that the company specializes in mold. Not mold and/or radon, lead, air ducts, etc. Next, I recommend that they have both education and experience at least equal to or better than their competitors. While most every state requires that home inspectors be licensed, only two states require so of mold inspectors.Are they certified? This would tell you that they cared enough about their profession to acquire knowledge and training to meet standards. Experience counts. How long has the inspector been certified? How many jobs have they performed? Not just the company, but the individual inspector? Can they get references? Have they been cited by the Better Business Bureau for any deceptive, misleading, or dishonest practices?

The next criteria is critical: Are they also in the business of mold remediation or removal? If they are it could be a blatant conflict of interest. Wouldn't it be to there interest to overstate the level of mold problems and/or the amount of remediation needed if they were in line to pick up a job worth several thousands of dollars? Therefore, I recommend that you find a professional who only inspects for mold.

OK, so now how should your inspector look for and find your problem? When they are finished will they be able to tell you for certain where your mold is and why you have the problem? Isn't that how you would like to spend your money?

Testing for mold is most often done by the old fashioned method called air testing. This procedure sucks air into a machine that then traps it into a laboratory testing dish, which in turn gets sent to a laboratory for culturing. This process can take a week or more for the results. When air testing is performed, the inspector should always take one test outside of the house in order to determine a benchmark as to what mold(s) are prevalent in your area. They then will try to take as many tests inside of the house as the customer can afford. In most areas of the country, these tests cost about $100 each. Some of the problems with air testing are:
1. The more tests that are performed, the more costly the job.
2. Air testing is highly inaccurate. All it can do is to tell you what was in the air at that location at that moment in time. Results can vary widely over time and method used. Airborne fungal spore concentrations vary greatly over the course of hours, days, weeks, and seasons.
3. In colder climates when there is snow on the ground, the results of the outside test will be useless in that spore count is greatly or totally reduced. I have yet to hear that a customer was told this fact.
4. There are no numerical standards to which tests can be prepared, making interpretation difficult.
5. Even the best tests can not determine how much exposure people in the house have had in the past.
6. Fungal air tests are expensive.
7. Results are slow to receive.
8. Knowing the type of mold does not change the way that you would respond. All mold that is active, or was active, is bad mold.

Then what does represent a professional, accurate, and helpful mold inspection? The most intelligent inspections should: Find all mold. Determine the cause; i.e. Where is the water problem(s). Explain how to fix the problem(s).

This inspection requires work, experience, and knowledge. It is also labor intensive; lasting about 2 hours or more on average. It begins with an intensive investigation of the property outside of the house. It finds flaws in roofs, chimneys, gutters, downspouts, foundations, and/or landscaping. In short, anywhere and any way that water could get into the house and cause a problem. Then, moving inside the inspection closely is conducted looking throughout the house, basement, and attic for issues under windows, sinks, tubs, showers, washer and dryers. Tools such as moisture meters, hygrometers, and boroscopes should be utilized as appropriate.

Following that, in my inspections, I work with a Certified Mold Dog. Together we systematically cover every inch of the house. Dogs such as mine have the ability to detect the scent of mold in one part per trillion. Humans are limited to one part per hundred. Two university studies are known that matched dogs scenting ability versus that of machines. Dogs won easily both times. Dogs have the ability to detect the scent of mold from behind walls, floors, or ceilings where it often is found. No machine can do that. With their ability to pinpoint the location of the mold, remediation costs are reduced to a fraction of what they may have been, or eliminated entirely.

Lastly, the customer should ask for, and receive a professionally written report that captures all that was seen, found, and measured during the inspection and remediation recommendations. This is how my company, Mold Rover, Inc. operates. It is what I think the customer needs and deserves for their money.

Remove Black Mold From Your Bathroom Walls

Mold & Moisture

The crawl space is the number one source for potential moisture entering your home. The moisture may be equal to gallons of water but in vapor form and not even visible. A seal tight liner kit will instantly stop the moisture in the crawl space from entering home as well as eliminating radon gas, musty odors, mildew and mold.

"The U.S. EPA states: "Molds are usually not a problem unless mold spores land on a wet or damp spot and begin growing. Molds produce allergens, irritants and potentially toxic substances. The key to mold control is moisture control. The mold will not grow if moisture is not present (source: EPA " A Brief Guide to Mold, Mildew and Your Home," publication #402-K-02-003)."

Eliminate the Existing Mold

To eliminate and prevent future mold growth, spray the affected areas with a mold killing and growth preventing spray, there are good products for purchase at your local building supply house.

My Take on the Problems with Bleach

The Myth Of Using Bleach To Kill Mold! Mold has a root system that actually grows into the surfaces of wood, drywall, concrete, etc..., like tree roots grow into the soil. The roots are not killed by bleach alone because the bleach does not penetrate the surface of porous materials. The bleach chemical portion sits on the surface until gassing off, killing only the mold on the surface leaving the roots intact, while the water portion of the bleach soaks into the material giving the mold roots a food source to start growing again. Think of it this way, if you were to cut a tree, plant, grass, or anything that has roots down and you water the area, you will see what you cut start to grow again. This is because the roots were not killed. The other problem with using bleach for an extended period is that if sprayed on wood and other building materials it actually starts to break down the products.

STOPPING MOLD AT THE ROOTS IS THE ONLY WAY!!!

Chlorine Bleach is NOT a registered EPA Mold Killing product!

If you think that we're just knocking bleach. Don't take our word for it! Go to http://epa.gov/mold/moldcourse/index.html and read what the EPA has to say about using bleach to kill mold. The EPA says that "The use of bleach is not recommended as a routine practice during mold clean-up" http://iaq.custhelp.com question #7.

Now you might ask: How do I kill mold if not with bleach?

Answer: Use an EPA approved and registered fungicide to kill the mold at its roots.


For More Information on Concrete Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Brownsboro Silicosis

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Brownsboro 

Bleach For Mold Remediation - Good Or Bad Decision?

– Entrust is to an Expert

Mold & Moisture

The crawl space is the number one source for potential moisture entering your home. The moisture may be equal to gallons of water but in vapor form and not even visible. A seal tight liner kit will instantly stop the moisture in the crawl space from entering home as well as eliminating radon gas, musty odors, mildew and mold.

"The U.S. EPA states: "Molds are usually not a problem unless mold spores land on a wet or damp spot and begin growing. Molds produce allergens, irritants and potentially toxic substances. The key to mold control is moisture control. The mold will not grow if moisture is not present (source: EPA " A Brief Guide to Mold, Mildew and Your Home," publication #402-K-02-003)."

Eliminate the Existing Mold

To eliminate and prevent future mold growth, spray the affected areas with a mold killing and growth preventing spray, there are good products for purchase at your local building supply house.

My Take on the Problems with Bleach

The Myth Of Using Bleach To Kill Mold! Mold has a root system that actually grows into the surfaces of wood, drywall, concrete, etc..., like tree roots grow into the soil. The roots are not killed by bleach alone because the bleach does not penetrate the surface of porous materials. The bleach chemical portion sits on the surface until gassing off, killing only the mold on the surface leaving the roots intact, while the water portion of the bleach soaks into the material giving the mold roots a food source to start growing again. Think of it this way, if you were to cut a tree, plant, grass, or anything that has roots down and you water the area, you will see what you cut start to grow again. This is because the roots were not killed. The other problem with using bleach for an extended period is that if sprayed on wood and other building materials it actually starts to break down the products.

STOPPING MOLD AT THE ROOTS IS THE ONLY WAY!!!

Chlorine Bleach is NOT a registered EPA Mold Killing product!

If you think that we're just knocking bleach. Don't take our word for it! Go to http://epa.gov/mold/moldcourse/index.html and read what the EPA has to say about using bleach to kill mold. The EPA says that "The use of bleach is not recommended as a routine practice during mold clean-up" http://iaq.custhelp.com question #7.

Now you might ask: How do I kill mold if not with bleach?

Answer: Use an EPA approved and registered fungicide to kill the mold at its roots.

Household Mold

Mold & Moisture

The crawl space is the number one source for potential moisture entering your home. The moisture may be equal to gallons of water but in vapor form and not even visible. A seal tight liner kit will instantly stop the moisture in the crawl space from entering home as well as eliminating radon gas, musty odors, mildew and mold.

"The U.S. EPA states: "Molds are usually not a problem unless mold spores land on a wet or damp spot and begin growing. Molds produce allergens, irritants and potentially toxic substances. The key to mold control is moisture control. The mold will not grow if moisture is not present (source: EPA " A Brief Guide to Mold, Mildew and Your Home," publication #402-K-02-003)."

Eliminate the Existing Mold

To eliminate and prevent future mold growth, spray the affected areas with a mold killing and growth preventing spray, there are good products for purchase at your local building supply house.

My Take on the Problems with Bleach

The Myth Of Using Bleach To Kill Mold! Mold has a root system that actually grows into the surfaces of wood, drywall, concrete, etc..., like tree roots grow into the soil. The roots are not killed by bleach alone because the bleach does not penetrate the surface of porous materials. The bleach chemical portion sits on the surface until gassing off, killing only the mold on the surface leaving the roots intact, while the water portion of the bleach soaks into the material giving the mold roots a food source to start growing again. Think of it this way, if you were to cut a tree, plant, grass, or anything that has roots down and you water the area, you will see what you cut start to grow again. This is because the roots were not killed. The other problem with using bleach for an extended period is that if sprayed on wood and other building materials it actually starts to break down the products.

STOPPING MOLD AT THE ROOTS IS THE ONLY WAY!!!

Chlorine Bleach is NOT a registered EPA Mold Killing product!

If you think that we're just knocking bleach. Don't take our word for it! Go to http://epa.gov/mold/moldcourse/index.html and read what the EPA has to say about using bleach to kill mold. The EPA says that "The use of bleach is not recommended as a routine practice during mold clean-up" http://iaq.custhelp.com question #7.

Now you might ask: How do I kill mold if not with bleach?

Answer: Use an EPA approved and registered fungicide to kill the mold at its roots.


For More Information on Toxins

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Nacogdoches Dustless Tile Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Nacogdoches 

The Best Way To Get Rid Of Black Mold

– Entrust is to an Expert

Mold spores. They almost sound like alien invaders from a 1950's sci-fi movie --"Attack of the Killer Mold Spores!" But that description may not be too far off the mark. Mold is dangerous. It can be more prevalent and can cause more health problems than termites, carbon monoxide, asbestos, or radon. In fact, mold is everywhere and impossible to get rid of in nature. According to the EPA website, "There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture." From one third to one half of all buildings in the United States have the damp conditions necessary to facilitate the growth of mold, according to the Consumer Product Safety Commission.

Mold and mold spores can cause serious health problems and, in the case of someone with mold sensitivities, even death. Many people are vaguely aware of the health concerns when it comes to mold but most do not know that mold can also cause serious damage to a house or building (similar to a termite infestation.) When it comes to protecting your family and your home, fighting and preventing mold should be at the top of every homeowner's list.

WHAT IS MOLD?

The simple answer: molds are part of the fungi kingdom, similar to yeasts or mushrooms (the antibiotic Penicillin is actually a mold.)Mold is a living organism, a part of nature, and even has a beneficial function - it breaks down all of our dead organic matter. Mold reproduces by releasing tiny spores, invisible to the naked eye, into the air. These spores land in moist areas and begin to grow and spread. While there are hundreds of thousands of varieties of mold, none would exist without the presence of moisture, air, and something to feed on. Since mold will always exist outdoors, it is important to control the one ingredient a homeowner doesn't need inside the house - moisture.

Mold can grow on rotting wood, grass, weeds, and compost piles. The problem is that it can also grow where you don't want it to - indoors. It can be found on food or clothing, in bathrooms and attics and damp basements, on carpeting, and even inside the walls of a house. Mold can feed on the wood in the wall, breaking down the materials as it spreads unseen throughout a house. As the mold digests organic material, it continues to spread to find new food sources.

Spotting mold can be easy, if the mold colony is visible. Mold comes in a variety of colors (including white, black, green, gray, brown, and more), bunching as spots or discolorations. If the mold is not visible, someone may not recognize mold is present until it is late in the process. People discover mold when there is physical damage to a structure or an increase in musty smells. Sometimes mold won't be found until the occupants experience health problems. By then, it may be too late. Whenever a house or building has an overexposure to moisture, it is important to inspect for mold. Moisture overexposure can come from many sources, including:

o Floods

o Roofs or basements that leak

o Irrigation or fire sprinklers

o Shower or bath water

o Sink or sewer overflow

o Humidifiers

o Plumbing leaks

WHY SHOULD I WORRY ABOUT MOLD?

There are two main reasons to worry about the spread of mold in a building. The most important consideration - mold can cause health problems. The second consideration - property damage. Frank Foreman, President & CEO of NO ODOR, Inc, a mold remediation company, believes mold is coming to the forefront because everyone is learning that mold damage can affect property value.

Let's start with the health issues. Molds produce allergens that can cause reactions such as sneezing, runny noses, even asthma attacks in those allergic to it. It can even cause irritation to the nose, throat, lungs, and eyes to those who are not allergic. Certain molds can also release toxins (mycotoxins) that cause more serious problems. According to the Mold Help Organization, exposure to these mycotoxins could cause people "to suffer from a myriad of serious symptoms and illnesses such as chronic bronchitis, learning disabilities, mental deficiencies, heart problems, cancer, multiple sclerosis, chronic fatigue, lupus, fibromyalgia, rheumatoid arthritis, multiple chemical sensitivity, bleeding lungs and much more" (http://www.mold-help.org/content/view/478/).

Because many people are not as aware or concerned about the health threats of mold, it is also important to consider the damage it can cause to property. Everyone tends to pay more attention to a problem when it affects the wallet. A home or business is the largest investment most people have. A colony or colonies of mold can cause severe devastation. According to the EPA website, "If you already have a mold problem - act quickly. Mold damages what it grows on. The longer it grows, the more damage it can cause" (http://www.epa.gov/mold/moldcleanup.html).

Mold can cause structural damage to a building, because it feeds on and breaks down the organic matter (wood, mostly) within the structure. When mold grows in the walls, on insulation, or under carpeting, these items must be removed from the building. In addition to the damage caused to the building, mold may destroy personal items in the home. It can attach to personal property which may be very difficult or impossible to clean. Often the item will have to be destroyed because the mold cannot be completely removed.

WHAT CAN BE DONE ABOUT THE MOLD?

For the most part, since mold is everywhere, it is impossible to completely avoid all indoor molds. The key to preventing mold is to control the moisture levels indoors. The EPA website states, "If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don't fix the water problem, then, most likely, the mold problem will come back" (http://www.epa.gov/mold/moldbasics.html).

For small areas, usually a moldy section of 9 to 10 square feet, the home or business owner can usually clean up the mold themselves. For larger areas, it is important to hire a professional mold removal contractor to make sure the problem is taken care of safely.

If you have a small patch of black, green or gray colored spots, Frank Foreman, of NO ODOR, Inc., has a smart tip to determine whether or not it is mold: put some hydrogen peroxide on the growth and watch the reaction. Almost everyone has one of those brown bottles of the 3% hydrogen peroxide solution in their medicine cabinet, so he suggests putting it in a clean spray bottle and spraying the colored spots. If the solution runs down the wall and there is no reaction, then the spots are not growths of mold (it could possibly just be dirt.) Since mold is a living organism, when sprayed with the hydrogen peroxide, there will be an oxidation process. If you hit it and the growth starts to foam up with white foam, then you know you are dealing with mold.

For small amounts of mold, many sources recommend using a combination of water and detergent to clean the moldy surfaces. However, Frank Foreman recommends using only products that are approved by the EPA to kill mold. He further states that care and precaution need to be taken when doing the cleanup by an individual. "Mold is a living organism and it can travel easily when disturbed. Someone may wash away half of the mold and the other half might release mold spores that can escape to another source of moisture in the home. Or worse, into the A/C or heating system which can spread mold spores to every room in the house," claims Foreman.

Foreman also suggests that someone with a mold problem should really educate themselves before hiring a professional to remove toxic mold. "The mold removal industry is completely unregulated. There are no federal, state, or local regulations that govern mold removal professionals." This means, according to Foreman, with no standards, there is no way to prove the job was done or that it is done right. "Only seventy to eighty percent of all mold removal jobs are done right, which means the property owner is going to have residual problems."

He says that it is important to shop around, to get references, and to scan the Internet to learn as much as possible about toxic mold and mold removal. "Education is the key. Learn the basics so you can talk to the remediation expert and you'll have a good idea if he or she really knows what they're doing."

Mold removal methods vary from company to company. But the process can be complicated and expensive. For example, if a 10' x 10' bedroom has two walls infested with mold, it may be necessary to seal off that portion of the house, remove all wall boards until there are no more visible signs of mold growth. Next, the remediation pro will have to hand sand away the mold. Then, a mold killing detergent will be washed over the surface. The exposed area will then be HEPA vacuumed to remove remnant spores. After the area is tested to make sure there is no more mold, new walls will have to be built back up and painted. As you can see, the process can be time consuming and very expensive. However, to save on excessive destruction, some professionals have been employing fiber optic technology to view within the walls or ceilings, looking for mold growth, before tearing down all the drywall.

If you have had a flooding problem or a major water leak, it is also important to contact your insurance company. Many do not know that insurance may cover the mold removal as well. However, most insurance companies are starting to put limits on mold removal coverage (sometimes keeping caps at $5000 to $10,000.) While it may sound like a lot of money, the insurance company will be giving you money to fix the damage and remove the mold. The mold removal process may cost more than repairing the damage caused by the water. For example, if the roof of a house comes off during a storm and causes water damage to the house, the insurance company may give a lump sum to cover the repairs to the roof, the damage inside, and the mold problem. By accepting their lump sum, you have to pay to replace the roof and damage from water but the money also has to cover the costs to remove the mold that may come days, weeks, or months later.

HOW CAN I PREVENT MOLD FROM COMING BACK?

Once you have removed the entire mold infestation from your property, it is still important to control moisture levels in the structure.

- If there is any kind of flooding, it is imperative you remove the water within 24 to 48 hours.

- Whenever possible, move wet items to a dry, well-ventilated place or outside to speed up the drying process. Remove drywall up to the height of the water level. Remove carpeting as soon as possible.

- Keep the indoor humidity low. If possible, keep below 60 percent relative humidity.

- If condensation or moisture collects on windows, walls or water pipes, dry the wet surface and reduce the moisture. Condensation can be a sign of high humidity.

- Keep gutters clean and make sure water drains away from the building to prevent it from collecting around the foundation.

- Run or install venting fans in high moisture areas, like the bathroom.

- Run a dehumidifier in moist areas, such as a basement or bathroom.

- Ventilating areas can help reduce moisture, as well as keeping the temperature up or the air conditioner on. However, aim the air conditioning vents away from the condensing surfaces to prevent cold spots where moisture condensation can occur.

- Adding thermal insulation to walls, ceilings, and pipes can help, too (in fact, rust spots on any water pipes could be an indication there is too much moisture in a room. Adding insulation to the pipes is a good idea.)

Mold can be a very serious problem in homes and businesses and it is important to take care of the problem as soon as possible. The consequences to health and property can be severe. While remediation of mold can be expensive, the damage mold can cause could be even worse. Frank Foreman has seen many cases where it is actually cheaper for the homeowner to knock down and rebuild an entire house rather than remove the existing mold infestation.

Keep in mind some of the potential signs that mold may be growing within a property:

o Unexplained discoloration on a surface

o Musty or earthy odor

o Dark spots on or around vents

o Water stains anywhere

o Peeling or curling of floors or wallpaper

Do your homework and hire a professional to handle even moderate mold problems as soon as possible. If one is not sure where to look for a mold removal and remediation specialist, there are services that can help everyone find a local professional.

Whenever a home or business owner believes there are signs of mold growth within their property, he or she should contact a professional as soon as possible to avoid future problems or costs. Attack those "Killer Mold Spores" before your own personal home invasion gets any worse.

Prevent Mold and Mildew

Mold & Moisture

The crawl space is the number one source for potential moisture entering your home. The moisture may be equal to gallons of water but in vapor form and not even visible. A seal tight liner kit will instantly stop the moisture in the crawl space from entering home as well as eliminating radon gas, musty odors, mildew and mold.

"The U.S. EPA states: "Molds are usually not a problem unless mold spores land on a wet or damp spot and begin growing. Molds produce allergens, irritants and potentially toxic substances. The key to mold control is moisture control. The mold will not grow if moisture is not present (source: EPA " A Brief Guide to Mold, Mildew and Your Home," publication #402-K-02-003)."

Eliminate the Existing Mold

To eliminate and prevent future mold growth, spray the affected areas with a mold killing and growth preventing spray, there are good products for purchase at your local building supply house.

My Take on the Problems with Bleach

The Myth Of Using Bleach To Kill Mold! Mold has a root system that actually grows into the surfaces of wood, drywall, concrete, etc..., like tree roots grow into the soil. The roots are not killed by bleach alone because the bleach does not penetrate the surface of porous materials. The bleach chemical portion sits on the surface until gassing off, killing only the mold on the surface leaving the roots intact, while the water portion of the bleach soaks into the material giving the mold roots a food source to start growing again. Think of it this way, if you were to cut a tree, plant, grass, or anything that has roots down and you water the area, you will see what you cut start to grow again. This is because the roots were not killed. The other problem with using bleach for an extended period is that if sprayed on wood and other building materials it actually starts to break down the products.

STOPPING MOLD AT THE ROOTS IS THE ONLY WAY!!!

Chlorine Bleach is NOT a registered EPA Mold Killing product!

If you think that we're just knocking bleach. Don't take our word for it! Go to http://epa.gov/mold/moldcourse/index.html and read what the EPA has to say about using bleach to kill mold. The EPA says that "The use of bleach is not recommended as a routine practice during mold clean-up" http://iaq.custhelp.com question #7.

Now you might ask: How do I kill mold if not with bleach?

Answer: Use an EPA approved and registered fungicide to kill the mold at its roots.


For More Information on Dust Free Tile Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Tenaha Allergies

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Tenaha 

How to Get Rid of Mold - Common Causes and Cleaning Techniques

– Entrust is to an Expert

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration

Mold - How to Get it Out of Your Home & Keep it Out

Mold spores. They almost sound like alien invaders from a 1950's sci-fi movie --"Attack of the Killer Mold Spores!" But that description may not be too far off the mark. Mold is dangerous. It can be more prevalent and can cause more health problems than termites, carbon monoxide, asbestos, or radon. In fact, mold is everywhere and impossible to get rid of in nature. According to the EPA website, "There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture." From one third to one half of all buildings in the United States have the damp conditions necessary to facilitate the growth of mold, according to the Consumer Product Safety Commission.

Mold and mold spores can cause serious health problems and, in the case of someone with mold sensitivities, even death. Many people are vaguely aware of the health concerns when it comes to mold but most do not know that mold can also cause serious damage to a house or building (similar to a termite infestation.) When it comes to protecting your family and your home, fighting and preventing mold should be at the top of every homeowner's list.

WHAT IS MOLD?

The simple answer: molds are part of the fungi kingdom, similar to yeasts or mushrooms (the antibiotic Penicillin is actually a mold.)Mold is a living organism, a part of nature, and even has a beneficial function - it breaks down all of our dead organic matter. Mold reproduces by releasing tiny spores, invisible to the naked eye, into the air. These spores land in moist areas and begin to grow and spread. While there are hundreds of thousands of varieties of mold, none would exist without the presence of moisture, air, and something to feed on. Since mold will always exist outdoors, it is important to control the one ingredient a homeowner doesn't need inside the house - moisture.

Mold can grow on rotting wood, grass, weeds, and compost piles. The problem is that it can also grow where you don't want it to - indoors. It can be found on food or clothing, in bathrooms and attics and damp basements, on carpeting, and even inside the walls of a house. Mold can feed on the wood in the wall, breaking down the materials as it spreads unseen throughout a house. As the mold digests organic material, it continues to spread to find new food sources.

Spotting mold can be easy, if the mold colony is visible. Mold comes in a variety of colors (including white, black, green, gray, brown, and more), bunching as spots or discolorations. If the mold is not visible, someone may not recognize mold is present until it is late in the process. People discover mold when there is physical damage to a structure or an increase in musty smells. Sometimes mold won't be found until the occupants experience health problems. By then, it may be too late. Whenever a house or building has an overexposure to moisture, it is important to inspect for mold. Moisture overexposure can come from many sources, including:

o Floods

o Roofs or basements that leak

o Irrigation or fire sprinklers

o Shower or bath water

o Sink or sewer overflow

o Humidifiers

o Plumbing leaks

WHY SHOULD I WORRY ABOUT MOLD?

There are two main reasons to worry about the spread of mold in a building. The most important consideration - mold can cause health problems. The second consideration - property damage. Frank Foreman, President & CEO of NO ODOR, Inc, a mold remediation company, believes mold is coming to the forefront because everyone is learning that mold damage can affect property value.

Let's start with the health issues. Molds produce allergens that can cause reactions such as sneezing, runny noses, even asthma attacks in those allergic to it. It can even cause irritation to the nose, throat, lungs, and eyes to those who are not allergic. Certain molds can also release toxins (mycotoxins) that cause more serious problems. According to the Mold Help Organization, exposure to these mycotoxins could cause people "to suffer from a myriad of serious symptoms and illnesses such as chronic bronchitis, learning disabilities, mental deficiencies, heart problems, cancer, multiple sclerosis, chronic fatigue, lupus, fibromyalgia, rheumatoid arthritis, multiple chemical sensitivity, bleeding lungs and much more" (http://www.mold-help.org/content/view/478/).

Because many people are not as aware or concerned about the health threats of mold, it is also important to consider the damage it can cause to property. Everyone tends to pay more attention to a problem when it affects the wallet. A home or business is the largest investment most people have. A colony or colonies of mold can cause severe devastation. According to the EPA website, "If you already have a mold problem - act quickly. Mold damages what it grows on. The longer it grows, the more damage it can cause" (http://www.epa.gov/mold/moldcleanup.html).

Mold can cause structural damage to a building, because it feeds on and breaks down the organic matter (wood, mostly) within the structure. When mold grows in the walls, on insulation, or under carpeting, these items must be removed from the building. In addition to the damage caused to the building, mold may destroy personal items in the home. It can attach to personal property which may be very difficult or impossible to clean. Often the item will have to be destroyed because the mold cannot be completely removed.

WHAT CAN BE DONE ABOUT THE MOLD?

For the most part, since mold is everywhere, it is impossible to completely avoid all indoor molds. The key to preventing mold is to control the moisture levels indoors. The EPA website states, "If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don't fix the water problem, then, most likely, the mold problem will come back" (http://www.epa.gov/mold/moldbasics.html).

For small areas, usually a moldy section of 9 to 10 square feet, the home or business owner can usually clean up the mold themselves. For larger areas, it is important to hire a professional mold removal contractor to make sure the problem is taken care of safely.

If you have a small patch of black, green or gray colored spots, Frank Foreman, of NO ODOR, Inc., has a smart tip to determine whether or not it is mold: put some hydrogen peroxide on the growth and watch the reaction. Almost everyone has one of those brown bottles of the 3% hydrogen peroxide solution in their medicine cabinet, so he suggests putting it in a clean spray bottle and spraying the colored spots. If the solution runs down the wall and there is no reaction, then the spots are not growths of mold (it could possibly just be dirt.) Since mold is a living organism, when sprayed with the hydrogen peroxide, there will be an oxidation process. If you hit it and the growth starts to foam up with white foam, then you know you are dealing with mold.

For small amounts of mold, many sources recommend using a combination of water and detergent to clean the moldy surfaces. However, Frank Foreman recommends using only products that are approved by the EPA to kill mold. He further states that care and precaution need to be taken when doing the cleanup by an individual. "Mold is a living organism and it can travel easily when disturbed. Someone may wash away half of the mold and the other half might release mold spores that can escape to another source of moisture in the home. Or worse, into the A/C or heating system which can spread mold spores to every room in the house," claims Foreman.

Foreman also suggests that someone with a mold problem should really educate themselves before hiring a professional to remove toxic mold. "The mold removal industry is completely unregulated. There are no federal, state, or local regulations that govern mold removal professionals." This means, according to Foreman, with no standards, there is no way to prove the job was done or that it is done right. "Only seventy to eighty percent of all mold removal jobs are done right, which means the property owner is going to have residual problems."

He says that it is important to shop around, to get references, and to scan the Internet to learn as much as possible about toxic mold and mold removal. "Education is the key. Learn the basics so you can talk to the remediation expert and you'll have a good idea if he or she really knows what they're doing."

Mold removal methods vary from company to company. But the process can be complicated and expensive. For example, if a 10' x 10' bedroom has two walls infested with mold, it may be necessary to seal off that portion of the house, remove all wall boards until there are no more visible signs of mold growth. Next, the remediation pro will have to hand sand away the mold. Then, a mold killing detergent will be washed over the surface. The exposed area will then be HEPA vacuumed to remove remnant spores. After the area is tested to make sure there is no more mold, new walls will have to be built back up and painted. As you can see, the process can be time consuming and very expensive. However, to save on excessive destruction, some professionals have been employing fiber optic technology to view within the walls or ceilings, looking for mold growth, before tearing down all the drywall.

If you have had a flooding problem or a major water leak, it is also important to contact your insurance company. Many do not know that insurance may cover the mold removal as well. However, most insurance companies are starting to put limits on mold removal coverage (sometimes keeping caps at $5000 to $10,000.) While it may sound like a lot of money, the insurance company will be giving you money to fix the damage and remove the mold. The mold removal process may cost more than repairing the damage caused by the water. For example, if the roof of a house comes off during a storm and causes water damage to the house, the insurance company may give a lump sum to cover the repairs to the roof, the damage inside, and the mold problem. By accepting their lump sum, you have to pay to replace the roof and damage from water but the money also has to cover the costs to remove the mold that may come days, weeks, or months later.

HOW CAN I PREVENT MOLD FROM COMING BACK?

Once you have removed the entire mold infestation from your property, it is still important to control moisture levels in the structure.

- If there is any kind of flooding, it is imperative you remove the water within 24 to 48 hours.

- Whenever possible, move wet items to a dry, well-ventilated place or outside to speed up the drying process. Remove drywall up to the height of the water level. Remove carpeting as soon as possible.

- Keep the indoor humidity low. If possible, keep below 60 percent relative humidity.

- If condensation or moisture collects on windows, walls or water pipes, dry the wet surface and reduce the moisture. Condensation can be a sign of high humidity.

- Keep gutters clean and make sure water drains away from the building to prevent it from collecting around the foundation.

- Run or install venting fans in high moisture areas, like the bathroom.

- Run a dehumidifier in moist areas, such as a basement or bathroom.

- Ventilating areas can help reduce moisture, as well as keeping the temperature up or the air conditioner on. However, aim the air conditioning vents away from the condensing surfaces to prevent cold spots where moisture condensation can occur.

- Adding thermal insulation to walls, ceilings, and pipes can help, too (in fact, rust spots on any water pipes could be an indication there is too much moisture in a room. Adding insulation to the pipes is a good idea.)

Mold can be a very serious problem in homes and businesses and it is important to take care of the problem as soon as possible. The consequences to health and property can be severe. While remediation of mold can be expensive, the damage mold can cause could be even worse. Frank Foreman has seen many cases where it is actually cheaper for the homeowner to knock down and rebuild an entire house rather than remove the existing mold infestation.

Keep in mind some of the potential signs that mold may be growing within a property:

o Unexplained discoloration on a surface

o Musty or earthy odor

o Dark spots on or around vents

o Water stains anywhere

o Peeling or curling of floors or wallpaper

Do your homework and hire a professional to handle even moderate mold problems as soon as possible. If one is not sure where to look for a mold removal and remediation specialist, there are services that can help everyone find a local professional.

Whenever a home or business owner believes there are signs of mold growth within their property, he or she should contact a professional as soon as possible to avoid future problems or costs. Attack those "Killer Mold Spores" before your own personal home invasion gets any worse.


For More Information on Toxins

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Chireno Saltillo Floor Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Chireno 

"Invasion of the Mold Spores" - Mold Removal Tips For the Property Owner

– Entrust is to an Expert

From the dawn of time mold has been on this planet. It comes in a variety of forms and colors and is caused by fungus growth. The spores of mold can cause the spread of this organism and certain factors can spur its growth. Mold needs a source of food, dampness, humidity and the spores themselves to be able to evolve.

Mold is present outdoors as well as inside. Typical places that mold grows are ceilings, wallpaper, wood, painted areas and carpets. It is quite normal to find it in places such as the basement or the bathroom. A few types of mold can be toxic and therefore dangerous to human health; this is the best reason to eradicate the problem. People can develop allergies to mold and many of the symptoms of suffering from the effects of mold include a runny nose, sneezing, itchy and red eyes as well as headaches.

There are easy ways in which you can rid your property of mold. In fact something as common and ordinary as vinegar can be used to get rid of mold. You can use a bottle to spray the vinegar directly onto the affected areas like grout in tiles, shower cubicles and the seals on faucets. Mold can grow anywhere in the home so remember to check all areas thoroughly- that unused kitchen cabinet with its food remnants and dampness will be a perfect place for mold to form.

A portable air conditioner is a handy utensil to have. During the hot and humid weather it will help to stop mold growing in your home. The humidity of your property should be kept at approximately 30%-50% to be productive.

In the winter months when it is colder, a dehumidifier is a great asset in the fight against the formation of mold in the home. Again, the humidity level should be maintained around the 30%-50% mark, but should still be at a pleasant level for your room temperature.

One of the commonest places to find mold is in the carpet. If you find that mold has settled on your carpet there are basically two options; you can replace the carpet with wooden flooring, or treat the carpet with baking soda. Leave the baking soda to sit on the carpet for a few hours and then vacuum off.

If the influx of mold is serious, then it may be best to consider calling the professionals to deal with the problem. An assessor can visit your home and identify the type of mold growing. Then a team will use tools such as wet vacuums, dry wipe materials and HEPA vacuums to eradicate the problem. There is a slight possibility that any lingering mold spores in the air may cause it to return, in which case a second treatment may be needed.

There is a serious element to mold being in your home and it should be considered an immediate problem, due to the possible risks to your health. As soon as you spot that mold forming tackle the problem quickly and head on.

Black Mold May Cause Sudden Infant Death Syndrome and Miscarriage

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration


For More Information on Asthma

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal

 

Perrin Granite Removal

Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to recognize the hazard and  understand the risk factors with silica.

There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.

Perrin 

How to Identify Mold With These 3 Mold Sampling Techniques

– Entrust is to an Expert

In order to remove bathroom mold, you will need a solution that can remove the source of the black mold. When cleaning mold and mildew, you have to observe the perimeter wall and also look for any sources of moisture. If you have black mold and mildew in your bathroom, it is most likely causing a problem with you and your family. By having these toxins which the spores produce, it will cause serious mold health effects. When removing mold, you will have to be sure to remove the source of the problem. Since mold and mildew are attracted to moisture and also need something to eat, you will have to find these sources. In more times than most, black mold and mildew grows on the wall because the wall is a building material which is a food source. When you have a high humidity value inside the areas of the bathroom, you will see dark spots of the black mold growing.

If you were to live with black mold in your house, you would feel some signs and symptoms of the toxins which the black mold delivers. These symptoms are caused from the excrement of the mold and mildew. Excrement is really the digestion of the mold and mildew. After eating off the walls of the home, the black mold delivered excrement which is toxic. Thus, while you and your family have mold issues.

In order to effectively remove the spores of the mold, you will need to find the source of the problem. If you have a water leak or some type of moisture intrusion, then you will need to find the source of this problem. By just removing the mold on the walls, and ignoring the source of the problem, you will still have a mold problem guaranteed. What mold inspections are about is finding the source of the problem. If you are clever enough to know there is a moisture problem you can then go ahead and attack the area using a natural cleaning product. Be sure when using natural cleaning products that they are strong enough to remove black mold effectively. Natural cleaning products are all about using regular household ingredients, but will effectively remove and prevent mold and mildew. The challenge with most green cleaning products is that they are not tough enough to destroy mold and mildew. Let me give you an example, most people will use bleach to remove the spores of the mold and mildew. But what happens here, is the mold is only removed temporarily. By using bleach you are only removing the topical surface of the problem. It is not attacking the source or changing the DNA make up of the mold and mildew. There is a natural ingredient out there which cleans mold and mildew and also creates a barrier to prevent mold growth.

By removing mold spores effectively, you will need to make sure the source is controlled. In order to control the source of the problem with mold. You will need a solution that creates a clear barrier or shield from you and the mold. This process is called an encapsulate. The encapsulate is a way which mold and mildew will suffocate because there is no source of food allowed. By protecting the walls of your bathroom, walls of your house, and other building materials, you have an ability to prevent the growth of mold and mildew. The challenge with black mold and mildew is taking away the source of the problem. Using bleach will only remove mold temporarily. If you are serious and have bathroom mold on your walls and in your house, then you need a strong natural cleaning product to kill mold. The natural cleaning product should be organic due to the harsh chemicals in other cleaning products. Have a look at Safe Shield to use as an effective natural cleaning product against mold and mildew. Safe Shield is also an organic solution and combined with Molderizer, it is a strong combination to effectively remove black mold and also prevent it from coming back. To increase the indoor air quality of your home, try an organic cleaning solution that will remove and prevent mold from ever coming back.

Prevent Mold and Mildew

Mold & Moisture

The crawl space is the number one source for potential moisture entering your home. The moisture may be equal to gallons of water but in vapor form and not even visible. A seal tight liner kit will instantly stop the moisture in the crawl space from entering home as well as eliminating radon gas, musty odors, mildew and mold.

"The U.S. EPA states: "Molds are usually not a problem unless mold spores land on a wet or damp spot and begin growing. Molds produce allergens, irritants and potentially toxic substances. The key to mold control is moisture control. The mold will not grow if moisture is not present (source: EPA " A Brief Guide to Mold, Mildew and Your Home," publication #402-K-02-003)."

Eliminate the Existing Mold

To eliminate and prevent future mold growth, spray the affected areas with a mold killing and growth preventing spray, there are good products for purchase at your local building supply house.

My Take on the Problems with Bleach

The Myth Of Using Bleach To Kill Mold! Mold has a root system that actually grows into the surfaces of wood, drywall, concrete, etc..., like tree roots grow into the soil. The roots are not killed by bleach alone because the bleach does not penetrate the surface of porous materials. The bleach chemical portion sits on the surface until gassing off, killing only the mold on the surface leaving the roots intact, while the water portion of the bleach soaks into the material giving the mold roots a food source to start growing again. Think of it this way, if you were to cut a tree, plant, grass, or anything that has roots down and you water the area, you will see what you cut start to grow again. This is because the roots were not killed. The other problem with using bleach for an extended period is that if sprayed on wood and other building materials it actually starts to break down the products.

STOPPING MOLD AT THE ROOTS IS THE ONLY WAY!!!

Chlorine Bleach is NOT a registered EPA Mold Killing product!

If you think that we're just knocking bleach. Don't take our word for it! Go to http://epa.gov/mold/moldcourse/index.html and read what the EPA has to say about using bleach to kill mold. The EPA says that "The use of bleach is not recommended as a routine practice during mold clean-up" http://iaq.custhelp.com question #7.

Now you might ask: How do I kill mold if not with bleach?

Answer: Use an EPA approved and registered fungicide to kill the mold at its roots.


For More Information on Ceramic Tile Removal

Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal

Texas Dust Free Wood Floor Removal