Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to understand the risk factors with silica.
There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.
Mold Inspections - Make the Best Choice – Entrust is to an Expert
Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.
Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.
These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.
Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.
1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.
2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.
3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.
4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.
5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.
If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.
Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:
The Best Way To Get Rid Of Black Mold
Before a person ever decides to search for the best mold inspection company in their area, they should first know a few facts:
1. In the author's opinion, every house on the planet has mold in it. Mold is a member of the Fungi family and exists naturally in our environment. It is airborne and enters our houses whenever a door or window is open and in numerous other ways.
2. Inside of a house, mold will not be a problem unless it has been exposed to water for more than 48-72 hours. So, if you have seen, or know of evidence of water inside your house and you suspect that it has been there for at least 48 hours, you are most certain to have harmful (toxic) mold.
3. Even if you can't see any water, it still may be lurking behind your walls, sinks, or tubs; perhaps under windows or other locations. If you can smell a musty or unpleasant odor (some in the family may detect it while others can't), you have a harmful mold problem.
4. If you or other members of your house have asthma, other respiratory problems, coughing, runny nose or eyes, headaches, or tend to feel much better when you are away from the house and worse when you are in it, you almost certainly have a mold problem.
Knowing that you likely have a mold problem but not knowing what to do next, speaks volumes in favor of hiring a professional. But which one? You could likely have several mold inspection companies to chose from on sites like Yahoo or Google; but how does a homeowner find the best one for their needs?
My advice is: First I recommend that the company specializes in mold. Not mold and/or radon, lead, air ducts, etc. Next, I recommend that they have both education and experience at least equal to or better than their competitors. While most every state requires that home inspectors be licensed, only two states require so of mold inspectors.Are they certified? This would tell you that they cared enough about their profession to acquire knowledge and training to meet standards. Experience counts. How long has the inspector been certified? How many jobs have they performed? Not just the company, but the individual inspector? Can they get references? Have they been cited by the Better Business Bureau for any deceptive, misleading, or dishonest practices?
The next criteria is critical: Are they also in the business of mold remediation or removal? If they are it could be a blatant conflict of interest. Wouldn't it be to there interest to overstate the level of mold problems and/or the amount of remediation needed if they were in line to pick up a job worth several thousands of dollars? Therefore, I recommend that you find a professional who only inspects for mold.
OK, so now how should your inspector look for and find your problem? When they are finished will they be able to tell you for certain where your mold is and why you have the problem? Isn't that how you would like to spend your money?
Testing for mold is most often done by the old fashioned method called air testing. This procedure sucks air into a machine that then traps it into a laboratory testing dish, which in turn gets sent to a laboratory for culturing. This process can take a week or more for the results. When air testing is performed, the inspector should always take one test outside of the house in order to determine a benchmark as to what mold(s) are prevalent in your area. They then will try to take as many tests inside of the house as the customer can afford. In most areas of the country, these tests cost about $100 each. Some of the problems with air testing are:
1. The more tests that are performed, the more costly the job.
2. Air testing is highly inaccurate. All it can do is to tell you what was in the air at that location at that moment in time. Results can vary widely over time and method used. Airborne fungal spore concentrations vary greatly over the course of hours, days, weeks, and seasons.
3. In colder climates when there is snow on the ground, the results of the outside test will be useless in that spore count is greatly or totally reduced. I have yet to hear that a customer was told this fact.
4. There are no numerical standards to which tests can be prepared, making interpretation difficult.
5. Even the best tests can not determine how much exposure people in the house have had in the past.
6. Fungal air tests are expensive.
7. Results are slow to receive.
8. Knowing the type of mold does not change the way that you would respond. All mold that is active, or was active, is bad mold.
Then what does represent a professional, accurate, and helpful mold inspection? The most intelligent inspections should: Find all mold. Determine the cause; i.e. Where is the water problem(s). Explain how to fix the problem(s).
This inspection requires work, experience, and knowledge. It is also labor intensive; lasting about 2 hours or more on average. It begins with an intensive investigation of the property outside of the house. It finds flaws in roofs, chimneys, gutters, downspouts, foundations, and/or landscaping. In short, anywhere and any way that water could get into the house and cause a problem. Then, moving inside the inspection closely is conducted looking throughout the house, basement, and attic for issues under windows, sinks, tubs, showers, washer and dryers. Tools such as moisture meters, hygrometers, and boroscopes should be utilized as appropriate.
Following that, in my inspections, I work with a Certified Mold Dog. Together we systematically cover every inch of the house. Dogs such as mine have the ability to detect the scent of mold in one part per trillion. Humans are limited to one part per hundred. Two university studies are known that matched dogs scenting ability versus that of machines. Dogs won easily both times. Dogs have the ability to detect the scent of mold from behind walls, floors, or ceilings where it often is found. No machine can do that. With their ability to pinpoint the location of the mold, remediation costs are reduced to a fraction of what they may have been, or eliminated entirely.
Lastly, the customer should ask for, and receive a professionally written report that captures all that was seen, found, and measured during the inspection and remediation recommendations. This is how my company, Mold Rover, Inc. operates. It is what I think the customer needs and deserves for their money.
For More Information on Dust Free Wood Floor Removal
Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal