Homeowners and employees may inhale to dangerous levels of silica dust when cutting, drilling, grinding, or otherwise disturbing materials that contain silica. These materials and tasks are common on construction jobs. Breathing that dust can lead to serious, often fatal illnesses. Know to understand the risk factors with silica.
There are ways contractors can reduce the dust and reduce the hazard. Selecting appropriate controls, and creating a job-specific plan to eliminate or reduce silica hazards is essential for any tile removal or wood floor removal.
How to Identify Mold With These 3 Mold Sampling Techniques – Entrust is to an Expert
From the dawn of time mold has been on this planet. It comes in a variety of forms and colors and is caused by fungus growth. The spores of mold can cause the spread of this organism and certain factors can spur its growth. Mold needs a source of food, dampness, humidity and the spores themselves to be able to evolve.
Mold is present outdoors as well as inside. Typical places that mold grows are ceilings, wallpaper, wood, painted areas and carpets. It is quite normal to find it in places such as the basement or the bathroom. A few types of mold can be toxic and therefore dangerous to human health; this is the best reason to eradicate the problem. People can develop allergies to mold and many of the symptoms of suffering from the effects of mold include a runny nose, sneezing, itchy and red eyes as well as headaches.
There are easy ways in which you can rid your property of mold. In fact something as common and ordinary as vinegar can be used to get rid of mold. You can use a bottle to spray the vinegar directly onto the affected areas like grout in tiles, shower cubicles and the seals on faucets. Mold can grow anywhere in the home so remember to check all areas thoroughly- that unused kitchen cabinet with its food remnants and dampness will be a perfect place for mold to form.
A portable air conditioner is a handy utensil to have. During the hot and humid weather it will help to stop mold growing in your home. The humidity of your property should be kept at approximately 30%-50% to be productive.
In the winter months when it is colder, a dehumidifier is a great asset in the fight against the formation of mold in the home. Again, the humidity level should be maintained around the 30%-50% mark, but should still be at a pleasant level for your room temperature.
One of the commonest places to find mold is in the carpet. If you find that mold has settled on your carpet there are basically two options; you can replace the carpet with wooden flooring, or treat the carpet with baking soda. Leave the baking soda to sit on the carpet for a few hours and then vacuum off.
If the influx of mold is serious, then it may be best to consider calling the professionals to deal with the problem. An assessor can visit your home and identify the type of mold growing. Then a team will use tools such as wet vacuums, dry wipe materials and HEPA vacuums to eradicate the problem. There is a slight possibility that any lingering mold spores in the air may cause it to return, in which case a second treatment may be needed.
There is a serious element to mold being in your home and it should be considered an immediate problem, due to the possible risks to your health. As soon as you spot that mold forming tackle the problem quickly and head on.
Mold - How to Get it Out of Your Home & Keep it Out
Before a person ever decides to search for the best mold inspection company in their area, they should first know a few facts:
1. In the author's opinion, every house on the planet has mold in it. Mold is a member of the Fungi family and exists naturally in our environment. It is airborne and enters our houses whenever a door or window is open and in numerous other ways.
2. Inside of a house, mold will not be a problem unless it has been exposed to water for more than 48-72 hours. So, if you have seen, or know of evidence of water inside your house and you suspect that it has been there for at least 48 hours, you are most certain to have harmful (toxic) mold.
3. Even if you can't see any water, it still may be lurking behind your walls, sinks, or tubs; perhaps under windows or other locations. If you can smell a musty or unpleasant odor (some in the family may detect it while others can't), you have a harmful mold problem.
4. If you or other members of your house have asthma, other respiratory problems, coughing, runny nose or eyes, headaches, or tend to feel much better when you are away from the house and worse when you are in it, you almost certainly have a mold problem.
Knowing that you likely have a mold problem but not knowing what to do next, speaks volumes in favor of hiring a professional. But which one? You could likely have several mold inspection companies to chose from on sites like Yahoo or Google; but how does a homeowner find the best one for their needs?
My advice is: First I recommend that the company specializes in mold. Not mold and/or radon, lead, air ducts, etc. Next, I recommend that they have both education and experience at least equal to or better than their competitors. While most every state requires that home inspectors be licensed, only two states require so of mold inspectors.Are they certified? This would tell you that they cared enough about their profession to acquire knowledge and training to meet standards. Experience counts. How long has the inspector been certified? How many jobs have they performed? Not just the company, but the individual inspector? Can they get references? Have they been cited by the Better Business Bureau for any deceptive, misleading, or dishonest practices?
The next criteria is critical: Are they also in the business of mold remediation or removal? If they are it could be a blatant conflict of interest. Wouldn't it be to there interest to overstate the level of mold problems and/or the amount of remediation needed if they were in line to pick up a job worth several thousands of dollars? Therefore, I recommend that you find a professional who only inspects for mold.
OK, so now how should your inspector look for and find your problem? When they are finished will they be able to tell you for certain where your mold is and why you have the problem? Isn't that how you would like to spend your money?
Testing for mold is most often done by the old fashioned method called air testing. This procedure sucks air into a machine that then traps it into a laboratory testing dish, which in turn gets sent to a laboratory for culturing. This process can take a week or more for the results. When air testing is performed, the inspector should always take one test outside of the house in order to determine a benchmark as to what mold(s) are prevalent in your area. They then will try to take as many tests inside of the house as the customer can afford. In most areas of the country, these tests cost about $100 each. Some of the problems with air testing are:
1. The more tests that are performed, the more costly the job.
2. Air testing is highly inaccurate. All it can do is to tell you what was in the air at that location at that moment in time. Results can vary widely over time and method used. Airborne fungal spore concentrations vary greatly over the course of hours, days, weeks, and seasons.
3. In colder climates when there is snow on the ground, the results of the outside test will be useless in that spore count is greatly or totally reduced. I have yet to hear that a customer was told this fact.
4. There are no numerical standards to which tests can be prepared, making interpretation difficult.
5. Even the best tests can not determine how much exposure people in the house have had in the past.
6. Fungal air tests are expensive.
7. Results are slow to receive.
8. Knowing the type of mold does not change the way that you would respond. All mold that is active, or was active, is bad mold.
Then what does represent a professional, accurate, and helpful mold inspection? The most intelligent inspections should: Find all mold. Determine the cause; i.e. Where is the water problem(s). Explain how to fix the problem(s).
This inspection requires work, experience, and knowledge. It is also labor intensive; lasting about 2 hours or more on average. It begins with an intensive investigation of the property outside of the house. It finds flaws in roofs, chimneys, gutters, downspouts, foundations, and/or landscaping. In short, anywhere and any way that water could get into the house and cause a problem. Then, moving inside the inspection closely is conducted looking throughout the house, basement, and attic for issues under windows, sinks, tubs, showers, washer and dryers. Tools such as moisture meters, hygrometers, and boroscopes should be utilized as appropriate.
Following that, in my inspections, I work with a Certified Mold Dog. Together we systematically cover every inch of the house. Dogs such as mine have the ability to detect the scent of mold in one part per trillion. Humans are limited to one part per hundred. Two university studies are known that matched dogs scenting ability versus that of machines. Dogs won easily both times. Dogs have the ability to detect the scent of mold from behind walls, floors, or ceilings where it often is found. No machine can do that. With their ability to pinpoint the location of the mold, remediation costs are reduced to a fraction of what they may have been, or eliminated entirely.
Lastly, the customer should ask for, and receive a professionally written report that captures all that was seen, found, and measured during the inspection and remediation recommendations. This is how my company, Mold Rover, Inc. operates. It is what I think the customer needs and deserves for their money.
For More Information on Asthma
Allergies, Toxins, Dustless Concrete Removal, Dust Control, Granite Removal, Silicosis Cancer, Silicosis, Chronic Silicosis, Tile Removal, Wood Floor Removal, Travertine Floor Removal, Clean Air Floor Removal, Ceramic Tile Removal, Dust Free Concrete Removal, , Dustless Tile Removal, Asthma, Dust Free Tile Removal, Dustless Wood Floor Removal, Marble Floor Removal, Dust Free Wood Floor Removal, Concrete Removal, Saltillo Floor Removal